[CentOS] Problem with running Centos 5.2 on Dell Optiplex 330

Mon Sep 8 09:56:31 UTC 2008
Mogens Kjaer <mk at crc.dk>

Pete Kay wrote:
...
> [root at localhost etc]# cat /var/log/messages |grep tg3
> Sep  8 20:54:58 localhost kernel: tg3.c:v3.86 (November 9, 2007)
> Sep  8 20:57:08 localhost kernel: tg3.c:v3.86 (November 9, 2007)
> Sep  8 23:37:21 localhost kernel: tg3.c:v3.86 (November 9, 2007)

There would be more interesting lines, like:

Sep  6 14:01:30 data1 kernel: tg3.c:v3.86 (November 9, 2007)
Sep  6 14:01:30 data1 kernel: ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI
29 (level, low) -> IRQ 177
Sep  6 14:01:30 data1 kernel: eth0: Tigon3 [partno(TBD) rev 1002
PHY(5703)] (PCI:66MHz:64-bit) 10/100/1000Base-T Ethernet 00:0b:cd:6a:fc:08
Sep  6 14:01:30 data1 kernel: eth0: RXcsums[1] LinkChgREG[0] MIirq[0]
ASF[0] WireSpeed[1] TSOcap[1]
Sep  6 14:01:30 data1 kernel: eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
...
Sep  6 14:01:30 data1 kernel: tg3: eth0: Link is up at 1000 Mbps, full
duplex.
Sep  6 14:01:30 data1 kernel: tg3: eth0: Flow control is on for TX and
on for RX.

Mogens

-- 
Mogens Kjaer, Carlsberg A/S, Computer Department
Gamle Carlsberg Vej 10, DK-2500 Valby, Denmark
Phone: +45 33 27 53 25, Fax: +45 33 27 47 08
Email: mk at crc.dk Homepage: http://www.crc.dk