nate wrote: > Joey Mendez wrote: > >> I appreciate your reply to my email. The steps ou have given me are >> things that I have done and are already in place. I still cannot get the >> eth to activate unless I issue it a static IP it for some reason will >> not activate under the DHCP selection. Has anyone ever experienced this. >> >> If I do assign it an IP it will activate but still has no internet >> connection. I can ping itself but cannot ping any machine outside of it >> or have a machine outside be able to ping it. >> > > What kind of network card? what network chip, what driver is being > used? > Realtek 8111/8168b module 8169 No link detected. When I attempt to install the driver that came on the CD with the box r8168-8.006.00. Once I get to the step to Make Clean Modules all I get is errors > My best guess at this point is the driver doesn't fully support the > network card so traffic cannot pass. Maybe the card is too new. > > Run ethtool eth0 (assuming your using eth0), and verify there is > a link detected as well. > > nate > > _______________________________________________ > CentOS mailing list > CentOS at centos.org > http://lists.centos.org/mailman/listinfo/centos > > -- Jose Mendez Computer Resource Specialist HNRC 619-543-8090 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20080919/b84e1ecb/attachment-0005.html>