Hey Listees I can not work out how to get my Dell NF500 III server to use wake on LAN using the on board Broadcom NetExtreme II BCM5708 NIC card? I'm running Cent OS 5.3 final (i386). Basically, If I had windows server 2k3 installed I know that the cards & mobo etc support WOL I would just have to tick a little box under the NIC card properties saying "allow wake on LAN" (or words to that affect). How can I enable WOL for my NIC card? I have two identical servers so I have tried putting one to sleep (via either setting the hibernate time down to 5 mins and waiting for it to time out and hibernate or by running the following as root: echo shutdown > /sys/power/disk; echo disk > /sys/power/state) and waking it up with ether-wake and WOL (an rpm package) but neither worked, also with a windows WOL client from a windows server which I know works as it is regularly in use but the system didn't come up. The light is glowing green on the mobo just next to the two on board NIC's (both are the same BCM5708's); the light is on but nobodies home? What setting might I be missing within CentOS its self to keep the cards alive when the power is out? Any help is greatly appreciated. Regards, James ;) -----BEGIN GEEK CODE BLOCK----- Version: 3.1 GIT/MU/U dpu s: a--> C++>$ U+> L++> B-> P+> E?> W+++>$ N K W++ O M++>$ V- PS+++ PE++ Y+ PGP t 5 X+ R- tv+ b+> DI D+++ G+ e(+++++) h--(++) r++ z++ ------END GEEK CODE BLOCK------