2009/12/31 Luciano Rocha <strange at nsk.no-ip.org>: > On Thu, Dec 31, 2009 at 11:39:25AM -0400, robert mena wrote: >> Hi, >> >> I lost my mdadm.conf (and /proc/mdadm shows nothing useful) and I'd like to >> mount the filesystem again. So I've booted using rescue but I was wondering >> if I can do a command like this safely (i.e without losing the data >> previously stored). >> >> mdadm -C /dev/md0 --level=raid0 --raid-devices=2 /dev/sda1 /dev/sdb1 >> >> Where of course the raid devices and the /dev/x are the correct ones > I can't say this with 100% certainty but I would of thought that it would been fine. I've lost my mdadm.conf (reinstalled OS) with a separate 4 disk RAID 5 array and re-assembled the array and carried on as if nothing had happened. Use "sudo mdadm -E --scan" do get a list of discovered RAID devices like this example: ARRAY /dev/md0 level=raid0 num-devices=2 UUID=fde94900:3f3f3bf6 Pop the results in your mdadm.conf and that should sort you out after a reboot (I think). Also try something like "sudo mdadm --assemble /dev/md1 /dev/sdb1 /dev/sdc1" to assemble the RAID manually. -- Regards, James ;) Pablo Picasso - "Computers are useless. They can only give you answers." - http://www.brainyquote.com/quotes/authors/p/pablo_picasso.html