[CentOS] cisco netflow analyzer?

Robinson Tiemuqinke hahaha_30k at yahoo.com
Tue Feb 24 00:23:12 UTC 2009


Anyone knows any Cisco netflow analyzer that could run on Linux/Windows? I know that cisco ASDM works at somewhat level but too rough...

For example, CIsco ASDM can only shows at IP level and only three types graph, like top 10 source Address, top ten destination level, or top ten services. but I want the analyzer to show different traffics from the same box when in need.

Any suggestions? Thanks

--Robinson



--- On Mon, 2/23/09, Jerry Geis <geisj at pagestation.com> wrote:

> From: Jerry Geis <geisj at pagestation.com>
> Subject: [CentOS] dell poweredge 860
> To: "CentOS ML" <centos at centos.org>
> Date: Monday, February 23, 2009, 6:54 PM
> Hi all,
> 
> Does anyone know of any issues with a dell poweredge 860?
> 
> I have one and the NMI number is getting high.
> I have a digium card in the box and the NMI grows with or
> without the 
> card in the box.
> 
> Any ideas? its fully updated. x86-64 5.2 system.
> Thanks,
> 
> Jerry
> 
>  more /proc/interrupts
>            CPU0       CPU1      
>   0:  555498463          0    IO-APIC-edge  timer
>   1:         10        675    IO-APIC-edge  i8042
>   8:          1          0    IO-APIC-edge  rtc
>   9:          0          0   IO-APIC-level  acpi
>  12:        134        199    IO-APIC-edge  i8042
>  14:         39          0    IO-APIC-edge  ide0
>  50:       7629   11537665   IO-APIC-level  uhci_hcd:usb1, 
> ehci_hcd:usb4, libata
>  66:       9326  555457273   IO-APIC-level  wct2xxp
> 169:        294    4561400   IO-APIC-level  eth0
> 177:          0          0   IO-APIC-level  uhci_hcd:usb2
> 185:          0          0   IO-APIC-level  uhci_hcd:usb3
> NMI:     214609     220298
> LOC:  550322710  550322638
> ERR:          0
> MIS:          0
> 
> 
> lspci is:
> 00:00.0 Host bridge: Intel Corporation E7230/3000/3010
> Memory Controller Hub
> 00:01.0 PCI bridge: Intel Corporation E7230/3000/3010 PCI
> Express Root Port
> 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family)
> PCI Express 
> Port 1 (rev 01)
> 00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7
> Family) PCI 
> Express Port 5 (rev 01)
> 00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7
> Family) PCI 
> Express Port 6 (rev 01)
> 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7
> Family) USB UHCI 
> Controller #1 (rev 01)
> 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7
> Family) USB UHCI 
> Controller #2 (rev 01)
> 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7
> Family) USB UHCI 
> Controller #3 (rev 01)
> 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7
> Family) USB2 EHCI 
> Controller (rev 01)
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev
> e1)
> 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7
> Family) LPC 
> Interface Bridge (rev 01)
> 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7
> Family) IDE 
> Controller (rev 01)
> 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH
> (ICH7 Family) 
> SATA IDE Controller (rev 01)
> 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus
> Controller 
> (rev 01)
> 02:00.0 PCI bridge: Intel Corporation 6702PXH PCI
> Express-to-PCI Bridge 
> A (rev 09)
> 03:02.0 Communication controller: Digium, Inc. Wildcard
> TE210P dual-span 
> T1/E1/J1 card 3.3V (rev 02)
> 04:00.0 Ethernet controller: Broadcom Corporation NetXtreme
> BCM5721 
> Gigabit Ethernet PCI Express (rev 11)
> 05:00.0 Ethernet controller: Broadcom Corporation NetXtreme
> BCM5721 
> Gigabit Ethernet PCI Express (rev 11)
> 06:05.0 VGA compatible controller: ATI Technologies Inc
> ES1000 (rev 02)
> 
> _______________________________________________
> CentOS mailing list
> CentOS at centos.org
> http://lists.centos.org/mailman/listinfo/centos


      



More information about the CentOS mailing list