[CentOS] dell poweredge 860

Jerry Geis geisj at pagestation.com
Tue Feb 24 15:56:11 UTC 2009


These are the results of the diag from dell.


	201 	Status: WarningThe following PCI devices share the same IRQ - 
[Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1]:[Intel 
Corporation 82801G (ICH7 Family) USB2 EHCI Controller] Irq: 50.
	
	
	201 	Status: WarningThe following PCI devices share the same IRQ - 
[Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1]:[Intel 
Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller] Irq: 50.
	
	
	400 	Status: WarningFor the device ATI Technologies Inc ES1000, the 
system reported the following status: Currently, this device is not 
using its IRQ.


I am running centos 5.2 x86_64
00:00.0 Host bridge: Intel Corporation E7230/3000/3010 Memory Controller Hub
00:01.0 PCI bridge: Intel Corporation E7230/3000/3010 PCI Express Root Port
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express 
Port 1 (rev 01)
00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI 
Express Port 5 (rev 01)
00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI 
Express Port 6 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI 
Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI 
Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI 
Controller #3 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI 
Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC 
Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE 
Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) 
SATA IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller 
(rev 01)
02:00.0 PCI bridge: Intel Corporation 6702PXH PCI Express-to-PCI Bridge 
A (rev 09)
03:02.0 Communication controller: Digium, Inc. Wildcard TE210P dual-span 
T1/E1/J1 card 3.3V (rev 02)
04:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5721 
Gigabit Ethernet PCI Express (rev 11)
05:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5721 
Gigabit Ethernet PCI Express (rev 11)
06:05.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02)

 more /proc/interrupts
           CPU0       CPU1      
  0:    8956830          0    IO-APIC-edge  timer
  1:         10        299    IO-APIC-edge  i8042
  8:          1          0    IO-APIC-edge  rtc
  9:          0          0   IO-APIC-level  acpi
 12:        134      15803    IO-APIC-edge  i8042
 14:         39          0    IO-APIC-edge  ide0
 50:      34754     350640   IO-APIC-level  uhci_hcd:usb1, 
ehci_hcd:usb4, libata
 66:       9562    8869833   IO-APIC-level  wct2xxp
169:         87     190208   IO-APIC-level  eth0
177:          0          0   IO-APIC-level  uhci_hcd:usb2
185:          0          0   IO-APIC-level  uhci_hcd:usb3
NMI:        598        722
LOC:    8800591    8800519
ERR:          0
MIS:          0



THe machine has 2 onboard NICS. I am only using eth0. eth1 has ONBOOT=no

What would be my next step? I dont think these items should be bothering 
a digium card?

Thanks,

Jerry




More information about the CentOS mailing list