On Mon, Feb 16, 2009 at 10:13 AM, muhammad panji <sumodirjo at gmail.com> wrote: > what about using monitoring tools like zenoss, groundwork, zabbix etc. > I think the could monitor temperature too. > regards, Good to have them. Thanks. Btw, using lm_sensors, I have the result: it87-isa-0290 Adapter: ISA adapter VCore 1: +1.62 V (min = +0.00 V, max = +4.08 V) VCore 2: +2.69 V (min = +0.00 V, max = +4.08 V) +3.3V: +3.31 V (min = +0.00 V, max = +4.08 V) +5V: +4.92 V (min = +0.00 V, max = +6.85 V) +12V: +12.35 V (min = +0.00 V, max = +16.32 V) -12V: -13.62 V (min = -27.36 V, max = +3.93 V) -5V: -9.28 V (min = -13.64 V, max = +4.03 V) Stdby: +3.06 V (min = +0.00 V, max = +6.85 V) VBat: +0.00 V fan1: 3443 RPM (min = 0 RPM, div = 8) fan2: 0 RPM (min = 0 RPM, div = 8) fan3: 0 RPM (min = 0 RPM, div = 8) M/B Temp: +35°C (low = +127°C, high = +127°C) sensor = thermistor CPU Temp: +29°C (low = +127°C, high = +127°C) sensor = thermistor Temp3: +49°C (low = +127°C, high = +127°C) sensor = diode I think I can write little script based on the info.