On Thu, 2009-02-19 at 14:31 -0500, James B. Byrne wrote: > Based on another message respecting power to the USB key I inserted > it into a port located at the back of the host and it was recognized > immediately. I have no idea why it is not picked up when placed > into on of the front panel usb ports but it matters not so long as I > can mount it. Check BIOIS setup and see if all the on-board usb ports are enabled. Also, front-panel ports usually have a small cable from the mainboard port to the panel connector. It may have become dislodged or be reversed if the connector is not keyed. > > Thanks for the help. > HTH -- Bill