Anyone knows any Cisco netflow analyzer that could run on Linux/Windows? I know that cisco ASDM works at somewhat level but too rough... For example, CIsco ASDM can only shows at IP level and only three types graph, like top 10 source Address, top ten destination level, or top ten services. but I want the analyzer to show different traffics from the same box when in need. Any suggestions? Thanks --Robinson --- On Mon, 2/23/09, Jerry Geis <geisj at pagestation.com> wrote: > From: Jerry Geis <geisj at pagestation.com> > Subject: [CentOS] dell poweredge 860 > To: "CentOS ML" <centos at centos.org> > Date: Monday, February 23, 2009, 6:54 PM > Hi all, > > Does anyone know of any issues with a dell poweredge 860? > > I have one and the NMI number is getting high. > I have a digium card in the box and the NMI grows with or > without the > card in the box. > > Any ideas? its fully updated. x86-64 5.2 system. > Thanks, > > Jerry > > more /proc/interrupts > CPU0 CPU1 > 0: 555498463 0 IO-APIC-edge timer > 1: 10 675 IO-APIC-edge i8042 > 8: 1 0 IO-APIC-edge rtc > 9: 0 0 IO-APIC-level acpi > 12: 134 199 IO-APIC-edge i8042 > 14: 39 0 IO-APIC-edge ide0 > 50: 7629 11537665 IO-APIC-level uhci_hcd:usb1, > ehci_hcd:usb4, libata > 66: 9326 555457273 IO-APIC-level wct2xxp > 169: 294 4561400 IO-APIC-level eth0 > 177: 0 0 IO-APIC-level uhci_hcd:usb2 > 185: 0 0 IO-APIC-level uhci_hcd:usb3 > NMI: 214609 220298 > LOC: 550322710 550322638 > ERR: 0 > MIS: 0 > > > lspci is: > 00:00.0 Host bridge: Intel Corporation E7230/3000/3010 > Memory Controller Hub > 00:01.0 PCI bridge: Intel Corporation E7230/3000/3010 PCI > Express Root Port > 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) > PCI Express > Port 1 (rev 01) > 00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 > Family) PCI > Express Port 5 (rev 01) > 00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 > Family) PCI > Express Port 6 (rev 01) > 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 > Family) USB UHCI > Controller #1 (rev 01) > 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 > Family) USB UHCI > Controller #2 (rev 01) > 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 > Family) USB UHCI > Controller #3 (rev 01) > 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 > Family) USB2 EHCI > Controller (rev 01) > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev > e1) > 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 > Family) LPC > Interface Bridge (rev 01) > 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 > Family) IDE > Controller (rev 01) > 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH > (ICH7 Family) > SATA IDE Controller (rev 01) > 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus > Controller > (rev 01) > 02:00.0 PCI bridge: Intel Corporation 6702PXH PCI > Express-to-PCI Bridge > A (rev 09) > 03:02.0 Communication controller: Digium, Inc. Wildcard > TE210P dual-span > T1/E1/J1 card 3.3V (rev 02) > 04:00.0 Ethernet controller: Broadcom Corporation NetXtreme > BCM5721 > Gigabit Ethernet PCI Express (rev 11) > 05:00.0 Ethernet controller: Broadcom Corporation NetXtreme > BCM5721 > Gigabit Ethernet PCI Express (rev 11) > 06:05.0 VGA compatible controller: ATI Technologies Inc > ES1000 (rev 02) > > _______________________________________________ > CentOS mailing list > CentOS at centos.org > http://lists.centos.org/mailman/listinfo/centos