These are the results of the diag from dell.
201 Status: WarningThe following PCI devices share the same IRQ -
[Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1]:[Intel
Corporation 82801G (ICH7 Family) USB2 EHCI Controller] Irq: 50.
201 Status: WarningThe following PCI devices share the same IRQ -
[Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1]:[Intel
Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller] Irq: 50.
400 Status: WarningFor the device ATI Technologies Inc ES1000, the
system reported the following status: Currently, this device is not
using its IRQ.
I am running centos 5.2 x86_64
00:00.0 Host bridge: Intel Corporation E7230/3000/3010 Memory Controller Hub
00:01.0 PCI bridge: Intel Corporation E7230/3000/3010 PCI Express Root Port
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 1 (rev 01)
00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI
Express Port 5 (rev 01)
00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI
Express Port 6 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #3 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC
Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE
Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family)
SATA IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller
(rev 01)
02:00.0 PCI bridge: Intel Corporation 6702PXH PCI Express-to-PCI Bridge
A (rev 09)
03:02.0 Communication controller: Digium, Inc. Wildcard TE210P dual-span
T1/E1/J1 card 3.3V (rev 02)
04:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5721
Gigabit Ethernet PCI Express (rev 11)
05:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5721
Gigabit Ethernet PCI Express (rev 11)
06:05.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02)
more /proc/interrupts
CPU0 CPU1
0: 8956830 0 IO-APIC-edge timer
1: 10 299 IO-APIC-edge i8042
8: 1 0 IO-APIC-edge rtc
9: 0 0 IO-APIC-level acpi
12: 134 15803 IO-APIC-edge i8042
14: 39 0 IO-APIC-edge ide0
50: 34754 350640 IO-APIC-level uhci_hcd:usb1,
ehci_hcd:usb4, libata
66: 9562 8869833 IO-APIC-level wct2xxp
169: 87 190208 IO-APIC-level eth0
177: 0 0 IO-APIC-level uhci_hcd:usb2
185: 0 0 IO-APIC-level uhci_hcd:usb3
NMI: 598 722
LOC: 8800591 8800519
ERR: 0
MIS: 0
THe machine has 2 onboard NICS. I am only using eth0. eth1 has ONBOOT=no
What would be my next step? I dont think these items should be bothering
a digium card?
Thanks,
Jerry