[CentOS] Multiple Internet facing Nics - Gateway issue
Doug Coats
dcoatshca at gmail.com
Thu Jul 2 15:18:12 UTC 2009
I was simply trying to follow the example in:
http://lartc.org/howto/lartc.rpdb.multiple-links.html
That is my introduction and main resource for what I was doing. If there is
other resorces that any could suggest beyond the man page I wold be
interested to understanding this better.
As a follow up issue. The only thing that is not working properly is that I
can not pull up my website that is hosted on this server from our private
network.
Do I need iproutes for my other two nics? I have never needed them before.
Thanks again for all your help!!!!!!!!!!!!
On Thu, Jul 2, 2009 at 8:06 AM, Chan Chung Hang Christopher <
christopher.chan at bradbury.edu.hk> wrote:
> Doug Coats wrote:
> > I am ecstatically confused.
> >
> > After I entered the last two commands my routing is working the way that
> I
> > need it to.
> >
> > ip rule add from 173.11.51.46 table Cable
> > ip rule add from 67.152.166.2 table T1
> >
> > The problem is I don't know which actual commands worked. I had just
> > rebooted. The other ip commands were all in the rc.local file so they
> all
> > ran.
> >
> > Why did the above commands make the Cable and T1 rules show up in the
> rules
> > list but the following two did not?
> >
> The following too are not ip rules. They are ip routing table entries.
> They will show up if you run 'ip route list table Cable'
>
> > ip route add 173.11.51.44/30 dev eth2 src 173.11.51.45 table Cable
> > ip route add 67.152.166.0/27 dev eth3 src 67.152.166.2 table T1
> > Do I need all of the commands? So that what is in rc.local looks like
> this?
> >
>
> Take a look at the ones I posted...they are taken from rc.local since I
> have not taken to effort to integrate them elsewhere per interface.
>
> > ip rule add from 173.11.51.46 table Cable
> > ip route add 173.11.51.44/30 dev eth2 src 173.11.51.45 table Cable
> > ip route add default via 173.11.51.45 table Cable
> > ip route add 173.11.51.44/30 dev eth2 src 173.11.51.45
> > ip route add default via 173.11.51.46
> > ip rule add from 173.11.51.45 to default lookup Cable
> > ip rule add from 67.152.166.2 table T1
> > ip route add 67.152.166.0/27 dev eth3 src 67.152.166.2 table T1
> > ip route add default via 67.152.166.2 table T1
> > ip route add 67.152.166.0/27 dev eth3 src 67.152.166.2
> > ip rule add from 67.152.166.2 to default lookup T1
> > ip route flush cache
> >
> >
> I find it interesting that you have ip rule commands before the relevant
> ip route commands for the custom routing table...
> _______________________________________________
> CentOS mailing list
> CentOS at centos.org
> http://lists.centos.org/mailman/listinfo/centos
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.centos.org/pipermail/centos/attachments/20090702/ba3048da/attachment.html>
More information about the CentOS
mailing list