[CentOS] PERC6 driver on CENTOS 5.3

[nate]

mcclnx mcc wrote:

> Does CENTOS 5.3 come with PERC6 driver?  I knew in CENTOS 4.X PERC 5 or
> PERC6 driver is not include.

I just deployed 10 R610s which have this controller with
CentOS 5.2, I later upgraded their kernels to the latest from 5.3,
though the rest of the systems are 5.2. Of course the drivers are
part of the kernel not the rest of the space.

03:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 1078
(rev 04)
        Subsystem: Dell PERC 6/i Integrated RAID Controller
        Flags: bus master, fast devsel, latency 0, IRQ 177
        Memory at df180000 (64-bit, non-prefetchable) [size=256K]
        I/O ports at fc00 [size=256]
        Memory at df1c0000 (64-bit, non-prefetchable) [size=256K]
        Expansion ROM at df100000 [disabled] [size=32K]
        Capabilities: [b0] Express Endpoint IRQ 0
        Capabilities: [c4] Message Signalled Interrupts: 64bit+ Queue=0/2
Enable-
        Capabilities: [d4] MSI-X: Enable- Mask- TabSize=4
        Capabilities: [e0] Power Management version 2
        Capabilities: [ec] Vital Product Data
        Capabilities: [100] Power Budgeting

I was also able to run R610s under CentOS 4.6 without any issue
as well.

nate