Filipe Brandenburger wrote: > Shouldn't it be something like this? > IPV6ADDR_SECONDARIES="2001:0470:0103:001A::3/64 > 2001:0470:0103:001A::4/64 2001:0470:0103:001A::5/64 > 2001:0470:0103:001A::6/64 2001:0470:0103:001A::7/64 > 2001:0470:0103:001A::8/64" > > HTH, > Filipe Thanks Felipe and Shawn, guess I hadn't tested it enough yet. That is the correct syntax. Here is an example from one of my boxes: [dveasey at test network-scripts]$ more ifcfg-eth0 USERCTL=yes DEVICE=eth0 BOOTPROTO=dhcp ONBOOT=yes TYPE=Ethernet ETHTOOL_OPTS="speed 100 duplex full autoneg off" IPV6INIT=yes IPV6ADDR=2001:1938:108:4400::2/64 IPV6ADDR_SECONDARIES="2001:4830:1128:4200::2/64 2001:4830:1128:4200::3/64 2001:4830:1128:4200::4/64" PEERDNS=yes [dveasey at test network-scripts]$ /sbin/ip addr ls dev eth0 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:30:18:b0:c0:91 brd ff:ff:ff:ff:ff:ff inet 10.8.9.248/19 brd 10.8.31.255 scope global eth0 inet6 2001:4830:1128:4200::4/64 scope global valid_lft forever preferred_lft forever inet6 2001:4830:1128:4200::3/64 scope global valid_lft forever preferred_lft forever inet6 2001:4830:1128:4200::2/64 scope global valid_lft forever preferred_lft forever inet6 2001:1938:108:4400::2/64 scope global valid_lft forever preferred_lft forever inet6 fe80::230:18ff:feb0:c091/64 scope link valid_lft forever preferred_lft forever