On Sat, Jun 20, 2009 at 4:55 PM, Michael Klinosky <mpk2 at enter.net> wrote: > > Akemi Yagi wrote: > > You might want to try the kernel drivers Alan Bartlett built about > > half an hour ago and released from the ELRepo site ( http://elrepo.org > > ). The details are in this CentOS forum thread: > > > > http://www.centos.org/modules/newbb/viewtopic.php?viewmode=flat&topic_id=14578&forum=39 > > Well, judging from that thread, I'm not sure it'll help. It seems that > it's SDHC (mine is basic SD - would it work?) and 64 bit (I'm still 32 bit). > > But, I'll check out the offerings. You can check to see if the driver works for your hardware. Run the lspci command (hint: -n option) and find the device ID. Compare it against the following info provided by Alan: sdhci.ko pci:v*d*sv*sd*bc08sc05i* pci:v0000104Cd00008034sv*sd*bc*sc*i* pci:v00001180d00000822sv*sd*bc*sc*i* pci:v00001180d00000822sv00001014sd*bc*sc*i* wbsd.ko pnp:dWEC0518* pnp:dWEC0517* This will eventually be added to the DeviceID list at http://elrepo.org/tiki/DeviceIDs . An example of lspci is found at http://elrepo.org/tiki/FAQ . Akemi