On Sat, Feb 28, 2009 at 1:40 AM, Filipe Brandenburger <filbranden at gmail.com> wrote: > On Fri, Feb 27, 2009 at 19:39, Joseph L. Casale > <JCasale at activenetwerx.com> wrote: >> Looks like rpmfind doesn't show any for RHEL :/ You might have to roll your own. >> Let's try and get Apcupsd working first, your config was wrong to start so its worth >> trying again. > > NUT RPMs seems to be available from EPEL. NUT 2.2.0 is available for > CentOS 5. Here are the i386 RPMs: > http://download.fedora.redhat.com/pub/epel/5/i386/repoview/nut.html I just installed the repo file for EPEL (and gave it a very low priority). I installed nut and nut-client from EPEL. When I try to start the ups daemon, I get the below error: ups failed. The error was: Starting UPS driver controller: [FAILED] Starting upsd: [FAILED] Starting UPS monitor (master): [FAILED] If I can't get apcupsd or nut configured properly, then I will try the WinPower software the UPS manufacturer (and many others) specify. I have the tar ball on my hard drive (45.3 MB) and maybe I can "roll my own" RPM for the first time.