On Sun, Mar 1, 2009 at 4:43 PM, Lanny Marcus <lmmailinglists at gmail.com> wrote: > On Sun, Mar 1, 2009 at 3:06 PM, Joseph L. Casale > <JCasale at activenetwerx.com> wrote: >>>When I try to >>>start the ups daemon, I get the below error: >>> >>>ups failed. The error was: Starting UPS driver controller: [FAILED] >>>Starting upsd: [FAILED] >>>Starting UPS monitor (master): [FAILED] <snip> > Joe: Thank you for replying again! This is a learning experience for > me. I just finished getting at the WinPower Linux stuff. Not at all > what I expected! Everything seems to be JRE. I didn't see any Linux > source files, etc., so now I assume that it is not open source and <snip> I have the WinPower UPS monitoring SW running OK on Linux. Voltage in and out is 122 and the maximum load I saw was 47%. I need to do a simulated power failure, to verify that it will in fact shutdown the box after 2 minutes! Still curious about nut and apcupsd and learning how to package. Thanks to everyone who replied!