[CentOS] Memory vs. Display Card

Mon Mar 9 16:34:56 UTC 2009
John R Pierce <pierce at hogranch.com>

Rick wrote:
> In article <f4e013870903082220s772af2d7o22c9686d6f1347e9 at mail.gmail.com>,
> MHR  <centos at centos.org> wrote:
>
>   
>> 2) Your answer above was not clear: did the 4GB work by itself without
>> the other 2GB?  If so, the above is your problem.  If not, you're in
>> deeper guano that you think, BUT:
>>     
>
> The 4GB had the same problem with and without the 2GB.
>   


ok, then you have the wrong 4GB (2x2GB?) sticks.   You might review the 
memory specs for your motherboard, not all DDR2 is the same.
http://www.intel.com/support/motherboards/desktop/d975xbx/sb/CS-026567.htm

specifically, you need 1.8-1.9V DDR2 unbuffered DIMMs, requires SPD, 667 
and 533Mhz.  2GB dimms must be organized as 8 128Mx8 dimms on each side.

personally, I'd pick my ram from this page
http://www.crucial.com/store/listparts.aspx?model=D975XBX

the stuff you buy through their guaranteed compatability program WILL work.