Hi all!
After booting the server I have this message:
irq 50: nobody cared (try booting with the "irqpoll" option)
Call Trace:
<IRQ> [<ffffffff800c17e6>] __report_bad_irq+0x30/0x7d
[<ffffffff800c1a19>] note_interrupt+0x1e6/0x227
[<ffffffff800c0f15>] __do_IRQ+0xbd/0x103
[<ffffffff8006e249>] do_IRQ+0x13f/0x14d
[<ffffffff8006ca05>] default_idle+0x0/0x50
[<ffffffff80060665>] ret_from_intr+0x0/0xa
<EOI> [<ffffffff8006ca2e>] default_idle+0x29/0x50
[<ffffffff8004b45d>] cpu_idle+0x77/0x96
[<ffffffff803f3826>] start_kernel+0x240/0x245
[<ffffffff803f3237>] _sinittext+0x237/0x23e
handlers:
[<ffffffff801df6c6>] (usb_hcd_irq+0x0/0x55)
Disabling IRQ #50
# cat /proc/interrupts
CPU0 CPU1
0: 100127 89815252 IO-APIC-edge timer
1: 144 82 IO-APIC-edge i8042
7: 0 0 IO-APIC-edge parport0
8: 0 1 IO-APIC-edge rtc
9: 0 0 IO-APIC-level acpi
12: 2783 1158 IO-APIC-edge i8042
50: 82343 17657 IO-APIC-level ehci_hcd:usb2
58: 0 87 IO-APIC-level ohci_hcd:usb3, HDA Intel
66: 0 0 IO-APIC-level ohci_hcd:usb4
98: 14065984 0 PCI-MSI eth0
233: 343943 698091 IO-APIC-level ehci_hcd:usb1, ahci
NMI: 2027 2500
LOC: 89901484 89901412
ERR: 0
MIS: 0
Server works normal, but what should I do with this ? Disable a USB
support ?
Hardware: Asus M2N-VM DVI, Athlon X2 4800+, 6G DDR2
Centos 5.3 x86_64
If you wish, dmesg here: http://paix.org.ua/tmp/dmesg_270509.txt
Thanks!.
--
Best wishes, Sergej Kandyla