Thumb drives are pretty much problem free, in my experience, unless there's a problem with the drive itself. Have you tried with a different drive? On Friday 22 May 2009 13:33:06 Jerry Geis wrote: > I am using centos5.3 x86_64 on a gigabyte GA-MA78GM-US2H motherboard. > > When I insert a USB thumbdrive its detected with dmesg, I mount it and > start to copy files. > Then I start getting errors: > sdd: assuming drive cache: write through > sdd: sdd1 sdd2 > sd 7:0:0:0: Attached scsi removable disk sdd > sd 7:0:0:0: Attached scsi generic sg4 type 0 > usb-storage: device scan complete > usb 1-5: reset high speed USB device using ehci_hcd and address 5 > usb 1-5: device descriptor read/64, error -110 > usb 1-5: device descriptor read/64, error -110 > usb 1-5: reset high speed USB device using ehci_hcd and address 5 > usb 1-5: device descriptor read/64, error -110 > usb 1-5: device descriptor read/64, error -110 > usb 1-5: reset high speed USB device using ehci_hcd and address 5 > usb 1-5: device not accepting address 5, error -110 > > I have also tried connecting a USB hub into my computer and using that. > Then plugging the thumbdrive into the hub. I get the same results. > > I have never had USB issues before - any ideas? > > Jerry > _______________________________________________ > CentOS mailing list > CentOS at centos.org > http://lists.centos.org/mailman/listinfo/centos > > -- > This message has been scanned for viruses and > dangerous content by MailScanner, and is > believed to be clean. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20090522/2dfe40c8/attachment-0004.html>