Nope, all of my adapters are Intel. 0f:00.0 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) (rev 01) 0f:00.1 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) (rev 01) 20:04.0 Ethernet controller: Intel Corporation 82541PI Gigabit Ethernet Controller (rev 05) Matt -- Mathew S. McCarrell Clarkson University '10 mccarrms at gmail.com mccarrms at clarkson.edu On Fri, May 22, 2009 at 1:20 PM, Peter Hopfgartner < peter.hopfgartner at r3-gis.com> wrote: > The guys on the Dell PowerEdge ML seem to be attracted by the idea that > it is a driver problem of the network adapter. In this case, lspci gives > me: > > 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 > Gigabit Ethernet (rev 12) > > Does this match your adapter? > > Regards, > > Peter > > Mathew S. McCarrell wrote: > > Actually, I've also been experience this issue on a two identical > > custom built systems running 5.3 x64 with Xen. I experienced the > > issue under the same kernel that Peter is running and the first kernel > > released with 5.3. > > > > In my particular instance, I'm attributing these random crashes to > > hardware problems since I'm only experiencing the issues on these two > > systems and not an older Dell PowerEdge 850 which is set up with the > > same software configuration. > > > > Matt > > > > -- > > Mathew S. McCarrell > > Clarkson University '10 > > > > mccarrms at gmail.com <mailto:mccarrms at gmail.com> > > mccarrms at clarkson.edu <mailto:mccarrms at clarkson.edu> > > > > > > On Fri, May 22, 2009 at 10:26 AM, Michael A. Peters <mpeters at mac.com > > <mailto:mpeters at mac.com>> wrote: > > > > JohnS wrote: > > > > > > > > My sejustion is unplug everything hooked to it but the power and > > network > > > cabling. Open it up while it is running, and shake the cables > > lightly > > > ( don't jerk on them). External disk array, unplug it also. USB > > floppies > > > and cd drives unplug emmm all. > > > > > > Is it under a heavy load? High cpu usage? Some times when there is > a > > > power supply on the verge of dying you don't really know until > > disk I/O > > > climbs real high thus pulling loads of wattage. > > > > That's my guess. > > I'd swap out the power supply. > > > > My personal experience with ram issues is either kernel panic or > > filesystem funnyness (sometimes resulting in filesystems being > > remounted > > read only). My experience with disk I/O issues is that forcing fsck > > reveals filesystem errors with high frequency. > > > > Rebooting machines in my experience is almost always a failing power > > supply (or faulty power source - check your UPS, when they start to > go > > bad they can cause issues). > > > > If it was a kernel issue, I suspect more people would be experiencing > > (unless it is caused by a third party kmod) > > _______________________________________________ > > CentOS mailing list > > CentOS at centos.org <mailto:CentOS at centos.org> > > http://lists.centos.org/mailman/listinfo/centos > > > > > > ------------------------------------------------------------------------ > > > > _______________________________________________ > > CentOS mailing list > > CentOS at centos.org > > http://lists.centos.org/mailman/listinfo/centos > > > > > -- > > Dott. Peter Hopfgartner > > R3 GIS Srl - GmbH > Via Johann Kravogl-Str. 2 > I-39012 Meran/Merano (BZ) > Email: peter.hopfgartner at r3-gis.com > Tel. : +39 0473 494949 > Fax : +39 0473 069902 > www : http://www.r3-gis.com > > _______________________________________________ > CentOS mailing list > CentOS at centos.org > http://lists.centos.org/mailman/listinfo/centos > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20090522/6aefffef/attachment-0005.html>