[CentOS] Problems with BCM5709 network

Fri Oct 23 13:28:06 UTC 2009
Toralf Lund <toralf.lund at pgs.com>

I've just installed CentOS 5.4 on an IBM server with a BCM5709 network 
adapter, and can't get networking to work. It looks like an appropriate 
driver (bnx2) is installed, lspci and the system log return sensible 
info on the unit,  there are no specific error message anywhere, but I 
get "no link present" when I try to activate the device. In other words, 
I see essentially the same behaviour as when the network cable is 
missing, but I've tried several cables, connection points etc. and also 
get the appropriate indicator lamps etc. so I'm quite sure the 
connection is good.

Does anyone have any idea what may be wrong? If not, have any of you lot 
got networking to work with a similar setup?

Some extracts from the system log are included below...

Thanks,

- Toralf

---
Oct 23 22:11:33 localhost kernel: Broadcom NetXtreme II Gigabit Ethernet 
Driver bnx2 v1.9.3 (March 17, 2009)
Oct 23 22:11:33 localhost kernel: ACPI: PCI Interrupt 0000:0b:00.0[A] -> 
GSI 28 (level, low) -> IRQ 169
Oct 23 22:11:33 localhost kernel: eth0: Broadcom NetXtreme II BCM5709 
1000Base-T (C0) PCI Express found at mem 92000000, IRQ 169, node addr 
00215edbc384
Oct 23 22:11:33 localhost kernel: ACPI: PCI Interrupt 0000:0b:00.1[B] -> 
GSI 40 (level, low) -> IRQ 106
Oct 23 22:11:33 localhost kernel: eth1: Broadcom NetXtreme II BCM5709 
1000Base-T (C0) PCI Express found at mem 94000000, IRQ 106, node addr 
00215edbc386
Oct 23 22:11:33 localhost kernel: ACPI: PCI Interrupt 0000:00:1f.3[B] -> 
GSI 22 (level, low) -> IRQ 114
[ ... ]
Oct 23 22:12:53 localhost kernel: bnx2: eth0: using MSIX
Oct 23 22:12:53 localhost kernel: ADDRCONF(NETDEV_UP): eth0: link is not 
ready




This e-mail, including any attachments and response string, may contain proprietary information which is confidential and may be legally privileged. It is for the intended recipient only. If you are not the intended recipient or transmission error has misdirected this e-mail, please notify the author by return e-mail and delete this message and any attachment immediately. If you are not the intended recipient you must not use, disclose, distribute, forward, copy, print or rely on this e-mail in any way except as permitted by the author.