Hi, I updated a server yesterday from "kernel 2.6.18-128.7.1.el5xen" to "kernel 2.6.18-164.el5xen" After rebooting, my message log is flooded every second or so with this error messages: Oct 6 14:52:20 xenserver1 kernel: EDAC MC0: UE row 0, channel-a= 0 channel-b= 1 labels "-": NON-FATAL recoverable (Branch=0 DRAM-Bank=0 Buffer ID = 0 RDWR=Read RAS=0 CAS=0 NON-FATAL recovera ble Err=0x2000 (FB-DIMM Configuration Write error on first attempt)) and Oct 6 15:17:23 xenserver1 kernel: EDAC MC0: CE row 0, channel 0, label "": Corrected error (Branch=0 DRAM-Bank=0 RDWR=Read RAS=0 CAS=0, CE Err=0x10000 (Correctable Non-Mirrored Demand Data E CC)) The machine is a new Tyan S5397 mobo with 16GB Kingston RAM KVR667D2D4F5K2/8G Removing and replacing memory to different locations doesn't make any difference. After some digging, I noticed that the new kernel has added support for the i5400 chipset. I found some reference that the new kernel has this error reporting capability the old one hadn't. Question1: how many recoverable RAM errors are acceptable? Question2: The error appears always with the same id in the error message. Mobo problem? Question3: Are there any recommended BIOS settings to operate the RAM slower to see if the problem disappears? Question4: Any other proposals. Being located in Germany makes the "just return it to the dealer" proposal quite unattractive. best regards --- Michael Schumacher PAMAS Partikelmess- und Analysesysteme GmbH Dieselstr.10, D-71277 Rutesheim Tel +49-7152-99630 Fax +49-7152-996333 Geschäftsführer: Gerhard Schreck Handelsregister B Stuttgart HRB 252024