On Oct 8, 2009, at 1:33 PM, Allie Daneman wrote: > I'm new to Linux and LVM coming from a BSD and Solaris background so I > apologize up front if there are good docs for this that I'm missing. > After > googling around and going through the LVM Admin docs for CentOS I > have a > few questions about an issue I have. > > Somehow either I did it out of stupidity or the installer > automagically > installed LVM and included both drives I have on this server. It's > configured as 1 Volume group and 1 huge drive so most of the docs on > LVM > I've seen don't jive. Here's my pvdisplay: > --- Physical volume --- > PV Name /dev/sda2 > VG Name VolGroup00 > PV Size 148.91 GB / not usable 4.15 MB > Allocatable yes (but full) > PE Size (KByte) 32768 > Total PE 4765 > Free PE 0 > Allocated PE 4765 > PV UUID DOv3Cl-LWoU-JG04-PT0P-VfIV-89p2-yrdnbp > > --- Physical volume --- > PV Name /dev/sdb1 > VG Name VolGroup00 > PV Size 149.05 GB / not usable 17.13 MB > Allocatable NO > PE Size (KByte) 32768 > Total PE 4769 > Free PE 0 > Allocated PE 4769 > PV UUID LK017x-dWzY-KIGL-kfOr-687Z-DgEn-YMfOw5 > > As you can see it seems like there's no room...but here's my df print: > Filesystem Size Used Avail Use% Mounted on > /dev/mapper/VolGroup00-LogVol00 > 288G 170G 104G 63% / > /dev/sda1 99M 31M 64M 33% /boot > tmpfs 315M 0 315M 0% /dev/shm > /dev/sdc1 230G 134G 85G 62% /ext_drive > > So I'm running out of room and wanting to move all data to my main > drive > so I can replace the 2nd drive with a bigger one. When I try a > pvmove it > states I have no room: > pvmove -v /dev/sdb1 > Finding volume group "VolGroup00" > No extents available for allocation > > So now I'm lost...how can I put all data on my 1st drive and unhook > the > 2nd from LVM to replace it ? Any assistance is greatly appreciated. > I'm > installing system-config-lvm hoping the GUI may help me as well. You have 170G of data spread throughout both disks and you want to move everything to the main disk which has only 148GB of capacity ? That doesn't add up. You can add this new bigger drive and stay with 3 drives then pvmove /dev/sdb1 onto it and remove it from the volume group. -Giovanni