On Sun, 2009-10-11 at 12:36 -0400, Ross Walker wrote:
> What does the ietd.conf, initiators.allow and targets.allow look like?
>
> What is your network setup? Are you using a vif on the loopback?
There's no VIF on loopback. The machine running iet has two NICs, the
private interconnect should not be playing a role. It's IP address is
10.200.2.2/24 while the local subnet is 10.200.1.0/24 and the iet
machine is IP address 10.200.1.6.
ietd.conf
------------------
Target iqn.2009-10.net.linush:storage.disk1.sys1.asmdg
Lun 0 Path=/dev/sdb,Type=blockio,ScsiId=asmdg,ScsiSN=dg0
HeaderDigest None
DataDigest None
MaxConnections 1
InitialR2T No
ImmediateData Yes
MaxRecvDataSegmentLength 262144
MaxXmitDataSegmentLength 262144
MaxBurstLength 524288
FirstBurstLength 262144
MaxOutstandingR2T 8
DataPDUInOrder Yes
DataSequenceInOrder Yes
ErrorRecoveryLevel 0
initiators.allow
------------------------
ALL 10.200.1.0/24
targets.allow
------------------------
ALL 10.200.1.0/24