well i have discovered that i have exactly the same hardware and it works like a charm :( that s really puzzling. perhaps a bad firmware update it seems like during the boot it can't see the disk :( Le 23/08/2010 15:22, Bent Terp a écrit : > On Mon, Aug 23, 2010 at 2:35 PM, Philippe Naudin< > philippe.naudin at supagro.inra.fr> wrote: > >> Le Mon, 23 Aug 2010 14:08:17 +0200, >> Eric Doutreleau<Eric.Doutreleau at it-sudparis.eu> a écrit : >> >>> hi >>> >>> i m trying to install centos5 on my poweredge 2950 with no luck. >>> the raid controler is >>> LSI Logic / Symbios Logic MegaRAID SAS 1078 (rev 04) >> >> I don't know for a 2950, but for a PE 1950 I have : >> alias scsi_hostadapter megaraid_mbox >> in /etc/modprobe.conf, and : >> >> $ modinfo megaraid_mbox >> filename: >> /lib/modules/2.6.18-194.11.1.el5/kernel/drivers/scsi/megaraid/megaraid_mbox.ko >> version: 2.20.5.1 >> license: GPL >> description: LSI Logic MegaRAID Mailbox Driver >> >> > We have a 2950 with a Perc 5/i controller running nicely, showing the same > modinfo output. > > [root at XXXXXXXX ~]# dmesg | grep LSI > scsi0 : LSI Logic SAS based MegaRAID driver > [root at XXXXXXXX ~]# > > BR Bent > > > > > _______________________________________________ > CentOS mailing list > CentOS at centos.org > http://lists.centos.org/mailman/listinfo/centos