we have CENTOS 5.5 on X86. I tried to create a "raw partition" (NOT FS) on a disk and it continue to show "ext3". How can I get ride of it?
=== procedures=====
# parted /dev/sde
GNU Parted 1.8.1
Using /dev/sde
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) p
Model: DELL PERC 5/E Adapter (scsi)
Disk /dev/sde: 3146GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start End Size File system Name Flags
1 17.4kB 120GB 120GB primary
2 120GB 240GB 120GB ext3 primary2
(parted) rm 2
(parted) p
Model: DELL PERC 5/E Adapter (scsi)
Disk /dev/sde: 3146GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start End Size File system Name Flags
1 17.4kB 120GB 120GB
(parted) mkpart prm2 120g 240g
(parted) p
Model: DELL PERC 5/E Adapter (scsi)
Disk /dev/sde: 3146GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start End Size File system Name Flags
1 17.4kB 120GB 120GB primary
2 120GB 240GB 120GB ext3 prm2