thus Andreas Reschke spake: > Hi Lisandro, > > just look at > http://www.lsi.de.com/channel/products/raid_controllers/sata_sas/9280-24i4e/index.html > and read the readme.txt. > > 1. download the megaraid_sas-v00.00.04.31-CentOs5.5-all.img > 2. insert a floppy > 3. dd if= megaraid_sas-v00.00.04.31-CentOs5.5-all.img of=/dev/floppy > and type at the boot-prompt "linux dd" (It should work using an USB stick, too... Timo) > That's all > > Andreas > > > > > "Lisandro Grullon" <lgrullon at CityTech.Cuny.Edu> > Gesendet von: centos-bounces at centos.org > 14.12.2010 14:26 > Bitte antworten an > CentOS mailing list <centos at centos.org> > > > An > <centos at centos.org> > Kopie > > Thema > [CentOS] MegaRAID SAS 9280-24i4e -- Centos support. > > > > > > Dear centos community, > I was in the process of installing centos in a machine however during the > install the OS is unable to see the controller "MegaRAID SAS 9280-24i4e", > i noticed that LSI has some drivers for centos. Can someone guide me on > how to load the drivers so the OS can see the controller as it loads. > Thank you in advance. Lisandro