Maybe one of you has experienced something like this before. I have a host running CentOS5.3, x86_64 version with the standard qla2xxx driver. Both ports are recognized and show output in dmesg but they never find my storage device: qla2xxx 0000:07:00.1: LIP reset occured (f700). qla2xxx 0000:07:00.1: LIP occured (f700). qla2xxx 0000:07:00.1: LIP reset occured (f7f7). qla2xxx 0000:07:00.0: LOOP UP detected (4 Gbps). qla2xxx 0000:07:00.0: SNS scan failed -- assuming zero-entry result... qla2xxx 0000:07:00.1: LOOP UP detected (4 Gbps). qla2xxx 0000:07:00.1: SNS scan failed -- assuming zero-entry result... The storage device is a virtual tape library on an HP d2d server. On the storage device I have configured the virtual tape drive and controller. I've also added the WWNs from the server and storage into a zone on our fiber switch, and made the zone config live. Anyone have some suggestions where I can start troubleshooting this?