From: Niki Kovacs <contact at kikinovak.net> > Hakan Koseoglu a écrit : > > On Wed, Feb 17, 2010 at 10:26 PM, Niki Kovacs wrote: > >> boot configuration tools (bios, scsi configurator). So far I haven't > > SCSI -> Disk > > > > Go to www.hp.com, , click on Support & Drivers, on Step 2, for product > > type ML 150, click GO. Select the correct generation, i.e. G5 or G6 > > etc. (it should be printed in the front), select Red Hat Enterprise > > Linux 5 Server (x86 or x86-64). Scroll down until you get to the > > Driver - Storage Controller section. Download HP ProLiant Smart Array > > Controller... And so on. > > I already followed these steps. Well, almost. My server is a ML150 G2 > model, and when I select it, I get support for : > > Microsoft Windows 2000 > Microsoft Windows Server 2003 > Microsoft Windows Server 2003 for 64-bit Extended Systems > Novell NetWare 6.5 > Red Hat Enterprise Linux 3 (AMD64/EM64T) > Red Hat Enterprise Linux 3 (x86) > Red Hat Enterprise Linux 4 (AMD64/EM64T) > Red Hat Enterprise Linux 4 (x86) > SUSE Linux Enterprise Server 10 (AMD64/EM64T) > SUSE Linux Enterprise Server 10 (x86) > SUSE Linux Enterprise Server 9 (AMD64/EM64T) > SUSE Linux Enterprise Server 9 (x86) > > No RHEL5 here. So I give RHEL4 (AMD64) a try, but the only thing I get > on the corresponding download page is this: > > - HP IP Console Switch Firmware Update for Linux > > And that's it. There's no other link. Maybe try this... http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=435422&prodNameId=3279685&swEnvOID=2026&swLang=8&mode=2&taskId=135&swItem=MTX-f47519edaa344e3da84b6da0cc JD