On Tue, Feb 9, 2010 at 1:19 PM, Robert <kerplop at sbcglobal.net> wrote: > > Yes, I have tried DVD media that is peddled as being lightscribe capable > and just minutes ago, opened a 20-pack of CD+R that are supposedly also > lightscribe capable. I have tried both the LaCie 4L s/w and > lightscribeApplications-1.18.6.1-0 and get nowhere with either of them. > I do have the driver, lightscribe-1.18.11.1-0 installed. > > After leaving the original question, I plugged the drive into a > WinXP-only laptop, Installed the bundled s/w and the same DVD was > recognized -- but only after quite a while. So, I'm about to conclude > that the media is flaky, the Linux s/w is impatient at best, broken at > worst. Whatever... I didn't throw away my CD marker. > I'd check with HP - they're pretty good about Linux support for their printers, so you might have some luck for this, too. I'm kind of surprised at this, too, though - lightscribe is no longer a new technology, and I would think by now that RH would include it, or have drivers for it, in the more recent releases (4 maybe, 5 for sure). Also, check some of the linux forums on the subject - you might find something else that works. I was looking for this a couple of years ago, but I never saw the value of lightscribe over labels, which can be printed on inkjet or lasers, in full colr, and "stomped" onto most CDs/DVDs with little or no trouble. (I've had to glue some down, but they work just fine.) HTH mhr