On 2/26/2010 12:11 PM, Dominik Zyla wrote:
> On Fri, Feb 26, 2010 at 09:57:52AM -0800, John R Pierce wrote:
>> Dominik Zyla wrote:
>>> But it'll not give information about temperature in server room.
>>>
>>
>> actually, it sorta can. find the lowest reading sensor on the
>> system, probably one on the mainboard... use a manual thermometer to
>> read the intake air temp and calculate the delta.
>>
>> i think you'll find under normal operating conditions that delta is
>> pretty constant if the server is under a reasonably consistent workload.
>
> True.. We're also doing like this in some of server rooms. But sometimes
> we had strange values. So this sort of stuff can be not good enough. :)
If you can get graphs from two different pieces of equipment on the same
page you can pretty much see the trend. A single device might have a
fan go bad or something - but that should probably be fixed anyway. On
servers that have variable CPU power you might see temperature
variations depending on the load.
--
Les Mikesell
lesmikesell at gmail.com