>OK using KS.. But from cd disks or http or ftp or nfs? Make sure you do >a self dependancy check on bind itself. Then I would check for the >correct gpg key on bind it self and deps. An iffy cdrom or network >connections that are some times faulty may cause it. Usually with me >turns out to be a semi bad cdrom or corrupt package. > >You can switch through to the anaconda terminal that shows all the >errors and that would be a good start to check first hand. Ok, finally got on a windows wkst so I could vm this up and be able to switch consoles. Looks like the problem is related to using two nics. Even though I specify ksdevice=eth0 on the grub line, it still seems to have trouble for some parts of downloading packages but not all? On one of the consoles, I see a dhclient help screen? I guess Anaconda is doing something with incorrect syntax. My ks lines are: network --device=eth0 --bootproto=dhcp network --device=eth1 --bootproto=static --ip=192.168.13.1 --netmask=255.255.255.0 --hostname=foo.bar.com So whats wrong here, or how can I resolve this? This *only* manifests when using cdrom and repo, but if I do a url install, it works? jlc