Hello Peter, Thanks for reply, Actually the Bios can see Dual Processor(no problem), so I think it's "broken" install problem, but how can I fix it without reinstalling the system, please find the two attached files . Thanks Anas Al-Naffar -----Original Message----- From: Peter Kjellstrom [mailto:cap at nsc.liu.se] Sent: Thursday, January 07, 2010 1:46 PM To: centos at centos.org Cc: Anas Alnaffar Subject: Re: [CentOS] 2 CPU's problem(Centos5) On Wednesday 06 January 2010, Anas Alnaffar wrote: > Dears, > > I hope this email finds you well and in a very good health, > > I've been installed Centos5 on HP DL380 G5 server(Dual Processor), but > actually we are unable to see the other CPU Centos-5 works correctly with "HP DL380 G5 server(Dual Processor)" without modifications. So you're chasing either a hardware configuration problem or a "broken" install. The contents of /proc/cpuinfo and the output of "dmesg" would allow us to give you better help. > , during boot I get this error > message, > > Module microcode doesn't exit /proc/modules This is not the cause. It's a non-fatal warning that can be ignored. /Peter > Please advise. > Thanks > Anas Al-Naffar -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: cpuinfo.txt URL: <http://lists.centos.org/pipermail/centos/attachments/20100109/fdfb0915/attachment-0010.txt> -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: dmesg.txt URL: <http://lists.centos.org/pipermail/centos/attachments/20100109/fdfb0915/attachment-0011.txt>