On Fri, Jan 22, 2010 at 04:37:30PM -0500, Robert Heller wrote: > I am trying to run my old CentOS4.8 (32-bit) system as a guest system > under CentOS5.4xen (64-bit). I followed the instructions in Appendix A > of the xen user manual (/usr/share/doc/xen-3.0.3/pdf/user.pdf) and > created a 'disk image' (actually a 10gig LVM logical volume: > Check this instead: http://www.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/5.4/html/Virtualization_Guide/index.html You can install CentOS4 guest using virt-install or virt-manager. The problem you have with your custom-made guest is that you're not using a Xen PV kernel. iirc it's called kernel-xenU in EL 4.8. -- Pasi > sauron.deepsoft.com% sudo fdisk -l /dev/mapper/sauron-c4guest > > Disk /dev/mapper/sauron-c4guest: 10.7 GB, 10737418240 bytes > 16 heads, 32 sectors/track, 40960 cylinders > Units = cylinders of 512 * 512 = 262144 bytes > > Device Boot Start End Blocks Id > System > /dev/mapper/sauron-c4guest1 * 1 40960 10485744 83 > Linux > sauron.deepsoft.com% sudo lomount -t ext3 -diskimage > /dev/mapper/sauron-c4guest -partition 1 /mnt/guest > sauron.deepsoft.com% ls -ltr /mnt/guest/boot > total 17432 > -rw-r--r-- 1 root root 51614 Jan 21 20:35 config-2.6.9-89.0.11.EL > -rw-r--r-- 1 root root 1425764 Jan 21 20:35 initrd-2.6.9-89.0.16.EL.img > -rw-r--r-- 1 root root 832064 Jan 21 20:35 initrd-2.6.9-89.0.15.EL.img > -rw-r--r-- 1 root root 832055 Jan 21 20:35 initrd-2.6.9-89.0.11.EL.img > -rw-r--r-- 1 root root 766328 Jan 21 20:35 initrd-2.6.9-78.0.22.EL.img-orig > -rw-r--r-- 1 root root 51613 Jan 21 20:35 config-2.6.9-89.0.9.EL > -rw-r--r-- 1 root root 55212 Jan 21 20:35 config-2.6.9-89.0.18.EL.plus.c4 > -rw-r--r-- 1 root root 51614 Jan 21 20:35 config-2.6.9-89.0.16.EL > -rw-r--r-- 1 root root 51614 Jan 21 20:35 config-2.6.9-89.0.15.EL > -rw-r--r-- 1 root root 768504 Jan 21 20:35 System.map-2.6.9-89.0.9.EL > -rw-r--r-- 1 root root 787043 Jan 21 20:35 System.map-2.6.9-89.0.18.EL.plus.c4 > -rw-r--r-- 1 root root 768660 Jan 21 20:35 System.map-2.6.9-89.0.16.EL > -rw-r--r-- 1 root root 768660 Jan 21 20:35 System.map-2.6.9-89.0.15.EL > -rw-r--r-- 1 root root 768606 Jan 21 20:35 System.map-2.6.9-89.0.11.EL > -rw-r--r-- 1 root root 67596 Jan 21 20:35 symvers-2.6.9-89.0.9.EL.gz > -rw-r--r-- 1 root root 78176 Jan 21 20:35 symvers-2.6.9-89.0.18.EL.plus.c4.gz > -rw-r--r-- 1 root root 67596 Jan 21 20:35 symvers-2.6.9-89.0.16.EL.gz > -rw-r--r-- 1 root root 67596 Jan 21 20:35 symvers-2.6.9-89.0.15.EL.gz > -rw-r--r-- 1 root root 67596 Jan 21 20:35 symvers-2.6.9-89.0.11.EL.gz > -rw-r--r-- 1 root root 832001 Jan 21 20:35 initrd-2.6.9-89.0.9.EL.img > -rw-r--r-- 1 root root 1533159 Jan 21 20:35 vmlinuz-2.6.9-89.0.9.EL > -rw-r--r-- 1 root root 1579298 Jan 21 20:35 vmlinuz-2.6.9-89.0.18.EL.plus.c4 > -rw-r--r-- 1 root root 1536244 Jan 21 20:35 vmlinuz-2.6.9-89.0.16.EL > -rw-r--r-- 1 root root 1536207 Jan 21 20:35 vmlinuz-2.6.9-89.0.15.EL > -rw-r--r-- 1 root root 1533468 Jan 21 20:35 vmlinuz-2.6.9-89.0.11.EL > drwxr-xr-x 2 root root 4096 Jan 21 20:36 grub > -rw-r--r-- 1 root root 796960 Jan 22 15:35 initrd-2.6.9-89.0.18.EL.plus.c4.img > sauron.deepsoft.com% cat /mnt/guest/boot/grub/grub.conf > # grub.conf generated by anaconda > # > # Note that you do not have to rerun grub after making changes to this file > # NOTICE: You have a /boot partition. This means that > # all kernel and initrd paths are relative to /boot/, eg. > # root (hd0,0) > # kernel /vmlinuz-version ro root=/dev/sauron/c5root > # initrd /initrd-version.img > #boot=/dev/sda > default=1 > timeout=5 > #splashimage=(hd0,0)/grub/splash.xpm.gz > hiddenmenu > title CentOS4 (2.6.9-89.0.18.EL.plus.c4) > root (hd0,0) > kernel /boot/vmlinuz-2.6.9-89.0.18.EL.plus.c4 ro root=/dev/hda1 single > initrd /boot/initrd-2.6.9-89.0.18.EL.plus.c4.img > > pygrub seems to be happy: > > sudo /usr/bin/pygrub /dev/mapper/sauron-c4guest > > [Reasonable imitation of a Grub boot screen] > > linux (kernel /var/lib/xen/boot_kernel.8bcf-G)(ramdisk /var/lib/xen/boot_ramdisk > > But when I try to start the guest, I get: > > error: POST operation failed: xend_post: error from xen daemon: > (xend.err "Error creating domain: (2, 'Invalid kernel', > 'xc_dom_find_loader: no loader found\\n')") > > I googled this error message and the only hits I got were about FC11 or > FC12 and some issue relating to how the kernel image was compressed, > which probably does not relate to an *older* CentOS 4 kernel. > > The config file for this guest is: > > sauron.deepsoft.com% sudo cat /etc/xen/c4guest > name = "c4guest" > uuid = "06bfb4e1-c427-c93c-2365-b80b832bb6d4" > maxmem = 512 > memory = 512 > vcpus = 1 > bootloader = "/usr/bin/pygrub" > on_poweroff = "destroy" > on_reboot = "restart" > on_crash = "restart" > vfb = [ "type=vnc,vncunused=1,keymap=en-us" ] > disk = [ "phy:/dev/mapper/sauron-c4guest,xvda,w" ] > vif = [ "mac=00:16:36:0a:d9:ac,bridge=virbr0,script=vif-bridge" ] > > What am I missing? > > It also appears I am limited to paravirtualization (does this matter?), > because my processor does not seem to support hardware virtualization > support: > > processor : 0 > vendor_id : AuthenticAMD > cpu family : 15 > model : 127 > model name : AMD Sempron(tm) Processor LE-1300 > stepping : 2 > cpu MHz : 1000.000 > cache size : 512 KB > fpu : yes > fpu_exception : yes > cpuid level : 1 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow up pni cx16 lahf_lm extapic cr8_legacy misalignsse > bogomips : 2000.01 > TLB size : 1024 4K pages > clflush size : 64 > cache_alignment : 64 > address sizes : 40 bits physical, 48 bits virtual > power management: ts fid vid ttp tm stc 100mhzsteps > > > > -- > Robert Heller -- 978-544-6933 > Deepwoods Software -- Download the Model Railroad System > http://www.deepsoft.com/ -- Binaries for Linux and MS-Windows > heller at deepsoft.com -- http://www.deepsoft.com/ModelRailroadSystem/ > > _______________________________________________ > CentOS mailing list > CentOS at centos.org > http://lists.centos.org/mailman/listinfo/centos