[CentOS] Fsck on mdraid array - SOLVED

Hei,

Ok, as many of you pointed out, the raid arrays did not start 
automatically on "linux rescue" boot (when not mounting the arrays).

I followed Mogens' advice: I let linux rescue mount the arrays, then 
checked /etc/mtab and unmounted everything. After that fsck run ok.

(Turned out the filesystems were ok, so my problem must lie elsewhere.)

- Jussi

On 22.7.2010 11.54, Mogens Kjaer wrote:
> You could try to let the rescue dvd mount the partitions.
>
> Then you can umount them and fsck.
>
> I don't think that the rescue disk assembles the RAID partitions
> unless they are going to be mounted.
>
> Mogens
>


-- 
Jussi Hirvi * Green Spot
Topeliuksenkatu 15 C * 00250 Helsinki * Finland
Tel. +358 9 493 981 * Mobile +358 40 771 2098 (only sms)
jussi.hirvi at greenspot.fi * http://www.greenspot.fi