On Wed, Jul 14, 2010 at 9:04 PM, Akemi Yagi <amyagi at gmail.com> wrote: > > We cannot tell until you check the vendor:device ID pair. It's a one-liner: > > for BUSID in $(/sbin/lspci | awk '{ IGNORECASE=1 } /net/ { print $1 > }'); do /sbin/lspci -s $BUSID -m; /sbin/lspci -s $BUSID -n; done > > Then you can find out if the driver is supported by the kernel. > > All the details are in #4 of the ELRepo FAQ at: > > http://elrepo.org/tiki/FAQ > Here's what i got - the first one is my vmware network bridge. $ for BUSID in $(/sbin/lspci | awk '{ IGNORECASE=1 } /net/ { print $1 > }'); do /sbin/lspci -s $BUSID -m; /sbin/lspci -s $BUSID -n; done 00:07.0 "Bridge" "nVidia Corporation" "MCP61 Ethernet" -ra2 "Elitegroup Computer Systems" "Unknown device 2609" 00:07.0 0680: 10de:03ef (rev a2) The FAQ shows this: pci 10DE:03EF kmod-forcedeth This is installed on my desktop (that has no wireless card), but I'll check the laptop tomorrow. Thanks - this and the guides on the CentOS page ought to cover it. I'll come back if I don't get it working.... Mark