On Tue, Jun 29, 2010 at 10:44 AM, Dicker, Edwin <EDicker at illumina.com>wrote: > > This is an issue with the graphics, it gets initialized in the wrong way > ( driver ) The installer does not recognize the correct video chip > during install. > If you boot the system in runlevel 3 and then change the driver to i810 > in the device section of /etc/X11/xorg.conf : > > Section "Device" > Identifier "Videocard0" > Driver "i810" > EndSection > > Good luck, > Edwin > > _______________________________________________ > CentOS mailing list > CentOS at centos.org > http://lists.centos.org/mailman/listinfo/centos > I tried both things. The bios update and the i810 driver and nothing worked. After the bios update the vesa driver seems a bit more stable, but still not 100%. And with the i810 driver it doesnt work at all. When X starts the screen starts to blink and does this forever (it didn't stop after 15 minutes, i didn't wait longer). When i looked at the Xorg log it says that the i810 driver is not the correct one for this chipset and that i should use the "intel" driver instead. Janez -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20100629/4f084a04/attachment-0005.html>