[CentOS] is it possible to recover LVM drive from accidental Fdisk? [SOLVED]

Sun Mar 7 19:09:53 UTC 2010
Rudi Ahlers <rudiahlers at gmail.com>

On Sun, Mar 7, 2010 at 8:50 AM, nate <centos at linuxpowered.net> wrote:

>
> re-create the original partition table, which is just a map, as long
> as you haven't formatted or overwritten data everything should still
> be there
>
> Also suggest if your not already doing it set your LVm partitons to
> type 8e so it's obvious they are LVM
>
> [root at dc1-mysql001b:~]# fdisk -l /dev/sdc
>
> Disk /dev/sdc: 2197.9 GB, 2197949513728 bytes
> 255 heads, 63 sectors/track, 267218 cylinders
> Units = cylinders of 16065 * 512 = 8225280 bytes
>
>   Device Boot      Start         End      Blocks   Id  System
> /dev/sdc1               1      267218  2146428553+  8e  Linux LVM
>
>
> nate
>
> _______________________________________________
>
>
Thanx Nate, I didn't know if this could damage the data or not, but it seems
that I could get the data of the HDD :)

The partitions (there's 4 of them) was still mounted on the sever ( I didn't
even think to check this before I sent-off this email) and I could recover
the data through the mounts.



-- 
Kind Regards
Rudi Ahlers
SoftDux

Website: http://www.SoftDux.com
Technical Blog: http://Blog.SoftDux.com
Office: 087 805 9573
Cell: 082 554 7532
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.centos.org/pipermail/centos/attachments/20100307/20b63faf/attachment-0004.html>