[CentOS] USB key installed OS; file system goes read-only randomly...

Fri May 7 02:49:41 UTC 2010
Jason Pyeron <jpyeron at pdinc.us>

> -----Original Message-----
> From: John R Pierce
> Sent: Thursday, May 06, 2010 22:35
> Subject: Re: [CentOS] USB key installed OS;file system goes 
> read-only randomly...

>From dmesg:

<snip/>
EXT3-fs error (device dm-0): ext3_free_blocks_sb: bit already cleared for block
506003
Aborting journal on device dm-0.
ext3_abort called.
EXT3-fs error (device dm-0): ext3_journal_start_sb: Detected aborted journal
Remounting filesystem read-only
<snip/>

The full log is below

> 
> Jason Pyeron wrote:
> > [root at test-dhcp ~]# tail -f /var/log/dmesg /var/log/secure 
> > /var/log/messages /var/log/faillog
> >   
> ...
> 
> note that /var/log/dmesg is just a snapshot of the output of 
> the program 
> dmesg taken after boot time.     the dmesg command dumps the current 
> kernel message buffer, but I don't believe it has a live 
> 'follow' mode.
> 
> that said, most stuff written to the kernel message buffer 
> gets processed by syslog and put in /var/log/messages
> 

[1]+  Stopped                 tail -f /var/log/dmesg /var/log/secure
/var/log/messages /var/log/faillog
[root at test-dhcp ~]# dmesg
Linux version 2.6.18-164.el5 (mockbuild at builder16.centos.org) (gcc version 4.1.2
20080704 (Red Hat 4.1.2-46)) #1 SMP Thu Sep 3 03:33:56 EDT 2009
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000010000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001bee0000 (usable)
 BIOS-e820: 000000001bee0000 - 000000001bee3000 (ACPI NVS)
 BIOS-e820: 000000001bee3000 - 000000001bef0000 (ACPI data)
 BIOS-e820: 000000001bef0000 - 000000001bf00000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
446MB LOWMEM available.
found SMP MP-table at 000f3e80
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
disabling kdump
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 114400
  DMA zone: 4096 pages, LIFO batch:0
  Normal zone: 110304 pages, LIFO batch:31
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP (v000 CX700                                 ) @ 0x000f7f70
ACPI: RSDT (v001 CX700  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1bee3040
ACPI: FADT (v001 CX700  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1bee30c0
ACPI: _HPT (v001 CX700  AWRDACPI 0x42302e31 AWRD 0x00000098) @ 0x1bee9480
ACPI: _WDT (v001 CX700  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1bee9500
ACPI: MCFG (v001 CX700  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1bee95c0
ACPI: MADT (v001 CX700  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1bee93c0
ACPI: DSDT (v001 CX700  AWRDACPI 0x00001000 MSFT 0x03000000) @ 0x00000000
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:13 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 20000000 (gap: 1bf00000:c4100000)
Detected 1199.604 MHz processor.
Built 1 zonelists.  Total pages: 114400
Kernel command line: ro root=/dev/VolGroup00/LogVol00
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0761000 soft=c0741000
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 445780k/457600k available (2154k kernel code, 11276k reserved, 899k
data, 232k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop (skipped), value calculated using timer frequency..
2399.20 BogoMIPS (lpj=1199604)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: a7c9baff 00100000 00000000 00000000 00004181
00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 128K (64 bytes/line)
CPU: After all inits, caps: 27c9b2ff 00100000 00000000 00000000 00004181
0000ffcc 00000000
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 14k freed
ACPI: Core revision 20060707
CPU0: Centaur VIA Eden Processor 1200MHz stepping 00
Total of 1 processors activated (2399.20 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=340 bytes
sizeof(dentry)=136 bytes
sizeof(ext3inode)=492 bytes
sizeof(buffer_head)=52 bytes
sizeof(skbuff)=176 bytes
checking if image is initramfs... it is
Freeing initrd memory: 3113k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:13.1
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *5
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Root Bridge [PCI1] (0000:80)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 15 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
pnp: 00:01: ioport range 0x400-0x47f could not be reserved
pnp: 00:01: ioport range 0x500-0x50f has been reserved
PCI: Bridge: 0000:00:01.0
  IO window: e000-0000
  MEM window: dd000000-00000000
  PREFETCH window 0x00000000a0000000-0x00000000bfffffff
PCI: Bridge: 0000:00:13.1
  IO window: d000-0000
  MEM window: dfe00000-00000000
  PREFETCH window 0x00000000dfd00000-0x00000000dfdfffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:13.1 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
type=2000 audit(1273172528.208:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
alg: No test for crc32c (crc32c-generic)
ksign: Installing public key data
Loading keyring
- Added public key 581431131FF6A527
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Fan [FAN] (on)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 2 throttling states)
ACPI: Thermal Zone [THRM] (36 C)
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:0f.0
VP_IDE: chipset revision 0
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: Unknown VIA SouthBridge, disabling DMA.
VP_IDE: IDE controller at PCI slot 0000:00:0f.0
VP_IDE: chipset revision 0
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: Unknown VIA SouthBridge, disabling DMA.
Probing IDE interface ide0...
Probing IDE interface ide1...
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
ACPI: (supports S0 S1 S4 S5)
Initalizing network drop monitor service
Time: tsc clocksource has been installed.
Freeing unused kernel memory: 232k freed
Write protecting the kernel read-only data: 404k
Time: acpi_pm clocksource has been installed.
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: PCI Interrupt 0000:00:10.4[D] -> GSI 23 (level, low) -> IRQ 169
PCI: VIA IRQ fixup for 0000:00:10.4, from 5 to 9
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: debug port 1
ehci_hcd 0000:00:10.4: irq 169, io mem 0xdffff000
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 177
PCI: VIA IRQ fixup for 0000:00:10.0, from 11 to 1
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 177, io base 0x0000fe00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 22 (level, low) -> IRQ 185
PCI: VIA IRQ fixup for 0000:00:10.1, from 10 to 9
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 185, io base 0x0000fd00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-2: new high speed USB device using ehci_hcd and address 2
ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 193
PCI: VIA IRQ fixup for 0000:00:10.2, from 11 to 1
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 193, io base 0x0000fc00
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-2: configuration #1 chosen from 1 choice
SCSI subsystem initialized
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
  Vendor: HP        Model: v125w             Rev: 0119
  Type:   Direct-Access                      ANSI SCSI revision: 02
SCSI device sda: 8017920 512-byte hdwr sectors (4105 MB)
sda: Write Protect is off
sda: Mode Sense: 23 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 8017920 512-byte hdwr sectors (4105 MB)
sda: Write Protect is off
sda: Mode Sense: 23 00 00 00
sda: assuming drive cache: write through
 sda: sda1 sda2
sd 0:0:0:0: Attached scsi removable disk sda
usb-storage: device scan complete
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel at redhat.com
device-mapper: dm-raid45: initialized v0.2594l
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
type=1404 audit(1273172560.075:2): enforcing=1 old_enforcing=0 auid=4294967295
ses=4294967295
security:  3 users, 6 roles, 1871 types, 242 bools, 1 sens, 1024 cats
security:  61 classes, 69981 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1273172561.092:3): policy loaded auid=4294967295 ses=4294967295
VIA Networking Velocity Family Gigabit Ethernet Adapter Driver Ver. 1.13
Copyright (c) 2002, 2003 VIA Networking Technologies, Inc.
Copyright (c) 2004 Red Hat Inc.
ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 18 (level, low) -> IRQ 201
eth0: VIA Networking Velocity Family Gigabit Ethernet Adapter
eth0: Ethernet Address: 00:30:18:AE:6B:84
input: PC Speaker as /class/input/input1
sd 0:0:0:0: Attached scsi generic sg0 type 0
ACPI: PCI Interrupt 0000:80:01.0[A] -> GSI 17 (level, low) -> IRQ 209
PCI: Setting latency timer of device 0000:80:01.0 to 64
floppy0: no floppy controllers found
lp: driver loaded but no devices found
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on dm-0, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 917496k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1
across:917496k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (3575 buckets, 28600 max) - 228 bytes per conntrack
process `sysctl' is using deprecated sysctl (syscall)
net.ipv6.neigh.lo.base_reachable_time; Use
net.ipv6.neigh.lo.base_reachable_time_ms instead.
Velocity is AUTO mode
ADDRCONF(NETDEV_UP): eth0: link is not ready
eth0: Link autonegation speed 1000M bps full duplex
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
eth0: no IPv6 routers present
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Bluetooth: BNEP filters: protocol multicast
EXT3-fs error (device dm-0): ext3_free_blocks_sb: bit already cleared for block
506003
Aborting journal on device dm-0.
ext3_abort called.
EXT3-fs error (device dm-0): ext3_journal_start_sb: Detected aborted journal
Remounting filesystem read-only
EXT3-fs error (device dm-0): ext3_free_blocks_sb: bit already cleared for block
506004
EXT3-fs error (device dm-0): ext3_free_blocks_sb: bit already cleared for block
506005
EXT3-fs error (device dm-0): ext3_free_blocks_sb: bit already cleared for block
506006
EXT3-fs error (device dm-0): ext3_free_blocks_sb: bit already cleared for block
506007
EXT3-fs error (device dm-0): ext3_free_blocks_sb: bit already cleared for block
506008
EXT3-fs error (device dm-0): ext3_free_blocks_sb: bit already cleared for block
506009
EXT3-fs error (device dm-0): ext3_free_blocks_sb: bit already cleared for block
506010
EXT3-fs error (device dm-0): ext3_free_blocks_sb: bit already cleared for block
506011
EXT3-fs error (device dm-0) in ext3_reserve_inode_write: Journal has aborted
EXT3-fs error (device dm-0) in ext3_truncate: Journal has aborted
EXT3-fs error (device dm-0) in ext3_reserve_inode_write: Journal has aborted
EXT3-fs error (device dm-0) in ext3_orphan_del: Journal has aborted
EXT3-fs error (device dm-0) in ext3_reserve_inode_write: Journal has aborted
__journal_remove_journal_head: freeing b_committed_data
ext3_abort called.
EXT3-fs error (device dm-0): ext3_remount: Abort forced by user
ext3_abort called.
EXT3-fs error (device dm-0): ext3_remount: Abort forced by user
ext3_abort called.
EXT3-fs error (device dm-0): ext3_remount: Abort forced by user
ext3_abort called.
EXT3-fs error (device dm-0): ext3_remount: Abort forced by user
audit(1273176061.441:21): audit_pid=0 old=1891 by auid=4294967295
subj=system_u:system_r:auditd_t:s0
type=1103 audit(1273176061.464:22): user pid=2757 uid=0 auid=4294967295
subj=system_u:system_r:crond_t:s0-s0:c0.c1023 msg='PAM: setcred acct="root" :
exe="/usr/sbin/crond" (hostname=?, addr=?, terminal=cron res=success)'
type=1006 audit(1273176061.465:23): login pid=2757 uid=0 old auid=4294967295 new
auid=0 old ses=4294967295 new ses=3
type=1105 audit(1273176061.480:24): user pid=2757 uid=0 auid=0
subj=system_u:system_r:crond_t:s0-s0:c0.c1023 msg='PAM: session open acct="root"
: exe="/usr/sbin/crond" (hostname=?, addr=?, terminal=cron res=success)'
type=1104 audit(1273176061.563:25): user pid=2757 uid=0 auid=0
subj=system_u:system_r:crond_t:s0-s0:c0.c1023 msg='PAM: setcred acct="root" :
exe="/usr/sbin/crond" (hostname=?, addr=?, terminal=cron res=success)'
type=1106 audit(1273176061.565:26): user pid=2757 uid=0 auid=0
subj=system_u:system_r:crond_t:s0-s0:c0.c1023 msg='PAM: session close
acct="root" : exe="/usr/sbin/crond" (hostname=?, addr=?, terminal=cron
res=success)'
type=1101 audit(1273179661.659:27): user pid=2859 uid=0 auid=4294967295
subj=system_u:system_r:crond_t:s0-s0:c0.c1023 msg='PAM: accounting acct="root" :
exe="/usr/sbin/crond" (hostname=?, addr=?, terminal=cron res=success)'
type=1103 audit(1273179661.664:28): user pid=2859 uid=0 auid=4294967295
subj=system_u:system_r:crond_t:s0-s0:c0.c1023 msg='PAM: setcred acct="root" :
exe="/usr/sbin/crond" (hostname=?, addr=?, terminal=cron res=success)'
type=1006 audit(1273179661.666:29): login pid=2859 uid=0 old auid=4294967295 new
auid=0 old ses=4294967295 new ses=4
type=1105 audit(1273179661.671:30): user pid=2859 uid=0 auid=0
subj=system_u:system_r:crond_t:s0-s0:c0.c1023 msg='PAM: session open acct="root"
: exe="/usr/sbin/crond" (hostname=?, addr=?, terminal=cron res=success)'
type=1104 audit(1273179661.709:31): user pid=2859 uid=0 auid=0
subj=system_u:system_r:crond_t:s0-s0:c0.c1023 msg='PAM: setcred acct="root" :
exe="/usr/sbin/crond" (hostname=?, addr=?, terminal=cron res=success)'
type=1106 audit(1273179661.710:32): user pid=2859 uid=0 auid=0
subj=system_u:system_r:crond_t:s0-s0:c0.c1023 msg='PAM: session close
acct="root" : exe="/usr/sbin/crond" (hostname=?, addr=?, terminal=cron
res=success)'
[root at test-dhcp ~]#



--
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
-                                                               -
- Jason Pyeron                      PD Inc. http://www.pdinc.us -
- Principal Consultant              10 West 24th Street #100    -
- +1 (443) 269-1555 x333            Baltimore, Maryland 21218   -
-                                                               -
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
This message is copyright PD Inc, subject to license 20080407P00.