>> GATEWAY=74.223.8.177 on /etc/sysconfig/network file ? >> >> > Actually I have that in the ifcfg-eth1 and ifcfg-eth2. And this is hte > route I get. > > DEVICE=eth1 > ONBOOT=YES > BOOTPROTO=static > IPADDR=74.223.8.179 > NETMASK=255.255.255.240 > GATEWAY=74.223.8.177 > > > DEVICE=eth2 > ONBOOT=Yes > BOOTPROTO=static > IPADDR=24.123.23.170 > NETMASK=255.255.255.248 > GATEWAY=24.123.23.169 > > route -n > Kernel IP routing table > Destination Gateway Genmask Flags Metric Ref Use > Iface > 24.123.23.168 0.0.0.0 255.255.255.248 U 0 0 0 eth2 > 74.223.8.176 0.0.0.0 255.255.255.240 U 0 0 0 eth1 > 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 > 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth2 > 0.0.0.0 24.123.23.169 0.0.0.0 UG 0 0 0 eth2 > > > I dont want 74.X traffic going out 24.X network. I want it going back > out the 74.X network. > How do I setup the ifcfg-eth files so the GW above will route back out > the correct gw? > > Jerry > > > Traffic will already route out the appropriate interface for a directly connected network. So packets to an IP on the 74.223.8.176/28 subnet should route out eth1 and packets to the 24.123.23.168/29 network will route out eth2. Are you trying to route other subnets within the 74.X.X.X out eth1? Cj