[CentOS] Memtest86+ running time
keith at karsites.net
Tue Nov 16 13:42:19 EST 2010
On Tue, 16 Nov 2010, m.roth at 5-cent.us wrote:
> To: CentOS mailing list <centos at centos.org>
> From: m.roth at 5-cent.us
> Subject: Re: [CentOS] Memtest86+ running time
> May I recommend looking at the docs that tell you what order the DIMMs
> need to be put into the board in? If you've got four slots, for example,
> I'll bet that it's 1 and 2, then 3 and 4, or maybe 1 and 3, then 2 and 4.
> I'd feel safe putting identical DIMMs in each pair, so that the first two
> are the bigger ones, and the second pair are smaller. A number of our
> servers *require* pairs, so if I start getting a lot of ECC errors, they
> send me a pair to replace them.
Thanks for that Mark.
The board acually only has 3 DIMM slots. Each slot will take
1GB maximum of RAM.
I do understand what you are saying about matching DIMM's
in pairs on a 4 slot board.
Main reasons for choosing this board was:
b) 5 PCI slots - so plenty of room for adding other stuff.
In theory, theory and practice are the same;
in practice they are not.
This email was sent from my laptop with Centos 5.5
More information about the CentOS