On 11/10/10 6:58 PM, Gilbert Sebenste wrote: > Hey everyone, > > I just got one of these today: > > Nov 10 16:07:54 stormy kernel: sd 0:0:0:0: SCSI error: return code = > 0x08000000 > Nov 10 16:07:54 stormy kernel: sda: Current: sense key: Medium Error > Nov 10 16:07:54 stormy kernel: Add. Sense: Unrecovered read error > Nov 10 16:07:54 stormy kernel: > Nov 10 16:07:54 stormy kernel: Info fld=0x0 > Nov 10 16:07:54 stormy kernel: end_request: I/O error, dev sda, sector > 3896150669 see where it says dev sda ? thats physical drive zero which has a read error on that sector. > Nov 10 16:07:54 stormy kernel: Read-error on swap-device (253:1:743752) > Nov 10 16:07:54 stormy kernel: Read-error on swap-device (253:1:743760) > Nov 10 16:07:54 stormy kernel: Read-error on swap-device (253:1:743768) > Nov 10 16:07:54 stormy kernel: Read-error on swap-device (253:1:743776) > Nov 10 16:07:54 stormy kernel: Read-error on swap-device (253:1:743784) > Nov 10 16:07:54 stormy kernel: Read-error on swap-device (253:1:743792) > Nov 10 16:07:54 stormy kernel: Read-error on swap-device (253:1:743800) > Nov 10 16:07:54 stormy kernel: Read-error on swap-device (253:1:743808) > > My question is this: I have RAID00 set up, but don't really understand > it well. This is how my disks are set up: > > Filesystem 1K-blocks Used Available Use% Mounted on > /dev/mapper/VolGroup00-LogVol00 > 1886608544 296733484 1492495120 17% / > /dev/sda1 101086 19877 75990 21% /boot > tmpfs 1684312 1204416 479896 72% /dev/shm > that is not how your disks are setup, thats how your FILE SYSTEMS are setup. that dev/mapper thing is a LVM volume. you can display the physical volumes behind a LVM with the command 'pvs' > Which one is having the trouble? Any ideas so I can swap it out? raid0 is not suitable for reliability. if any one drive in the raid0 fails (or is removed) the whole volume has failed and will become unusable.