On Wed, Apr 13, 2011 at 11:34 PM, Ryan Wagoner <rswagoner at gmail.com> wrote: > On Wed, Apr 13, 2011 at 1:10 PM, Nicolas Ross > <rossnick-lists at cybercat.ca> wrote: > >>> I have Sangoma A101DE 1 Port E1/T1 With Hardware Echo Cancellation ( > PCI > >>> Express ) Card installed on the box. Its not detected. Details are as > >>> below > >>> :- > >> > >> Sounds like a hardware problem. I'm running CentOS 5.5 with three > >> Sangoma cards and Asterisk. The one is showing up as a A200 card > >> instead of a A102d card but it is working fine. > >> > >> (...) > > > > What kind of HW is the machine ? You realy have 10 T1 on one machine ? > How > > does that scale ? > > > > We were migrating from a Toshiba digital system to VoIP in phases. I > had 4 PRIs between the systems and 5 PRIs to the phone company. It's > running on a Dell R710 with two Intel E5520 quad cores and 6GB of > memory. The hardware is probably overkill, but dual processors are > cheap compared to PRI cards. During the middle of the day we average > 50-60 concurrent calls with around 4,000 calls per day. System load > stays right around 1.00. > > Ryan > _______________________________________________ > CentOS mailing list > CentOS at centos.org > http://lists.centos.org/mailman/listinfo/centos > Hi I get anaconda.log:23:07:59 DEBUG : ignoring driverless device Sangoma Technologies Corp. A200/Remora FXO/FXS Analog AFT card Linux asterisk 2.6.18-194.11.1.el5 #1 SMP Tue Aug 10 19:05:06 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux lspci | grep sangoma does not return anything Please suggest further. Thanks Kaushal Please suggest further -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20110414/3121dd8e/attachment-0005.html>