Thanks for both the replies, I'm trying it out again. Text base installation is fine with me, which was what I was originally trying to do anyway. Unfortunately, I'm still stuck at what should be the console with the same "Connected to domain vm01. Escape char is ^]" message. > virsh ttyconsole vm01 gives me /dev/pts/0 So the console was defined correctly, I could connect using virsh console vm01, which brings me back to the blank screen. Checking /var/log/libvirt/qemu/vm01.log reveals no error, just the installation parameters and the fact it's redirecting char device to /dev/pts/0 Just in case KVM is still booting the VM, I've checked top and kvm is basically idling. Is there anyway to check if KVM actually booted the VM past the equivalent of BIOS POST? So that I can determine if it's hang at initialization or it's the installation ISO that's the problem? On 4/26/11, Jussi Hirvi <listmember at greenspot.fi> wrote: > On 26.4.2011 0.47, Emmanuel Noobadmin wrote: >> I'm having problems trying to install CentOS as a KVM guest despite >> following the wikis and howtos. > > I succeeded with this howto: > > http://sysadminman.net/blog/2011/kvm-virtualization-text-centos-guest-install-2098 > > Except I skipped the lvcreate part, as I don't use LVM. > > - Jussi > _______________________________________________ > CentOS mailing list > CentOS at centos.org > http://lists.centos.org/mailman/listinfo/centos >