[CentOS] Sangoma A101DE 1 Port E1/T1 With Hardware Echo Cancellation ( PCI Express ) Card installed on the box
Tim Nelson
tnelson at rockbochs.comWed Apr 13 19:33:58 UTC 2011
- Previous message: [CentOS] Sangoma A101DE 1 Port E1/T1 With Hardware Echo Cancellation ( PCI Express ) Card installed on the box
- Next message: [CentOS] Sangoma A101DE 1 Port E1/T1 With Hardware Echo Cancellation ( PCI Express ) Card installed on the box
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
----- Original Message ----- > > (...) > > You need to contact the vendor and ask them for a driver for the > > card. > > anaconda's *telling* you that it has no driver for the card, at > > least as > > far as I can tell. > > Even so, the card with no driver would be listed in lspci... > _______________________________________________ ^^^ Exactly. Just as I posted on the asterisk-users list for this, power down your system, reseat the card tightly and/or try another slot, then power back up and run lspci again. If you're still not seeing the card listed, I'd have to believe you have a defective card. Either way, contact Sangoma support. --Tim
- Previous message: [CentOS] Sangoma A101DE 1 Port E1/T1 With Hardware Echo Cancellation ( PCI Express ) Card installed on the box
- Next message: [CentOS] Sangoma A101DE 1 Port E1/T1 With Hardware Echo Cancellation ( PCI Express ) Card installed on the box
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the CentOS mailing list