[CentOS] usb 3

[Lisandro Grullon]

It would be great if you can post the output of this command to see the device ID
 
/sbin/lspci - n | grep '01:00.0'

>>> Jerry Geis <geisj at MessageNetSystems.com> 1/10/2011 3:12 PM >>>
sure - I can wait for 6.
Was hoping it would be here by now.

Jerry

Lisandro Grullon wrote: 


Likely support for 3.0 hasn't reach that kernel, probably in the present unstable build it is being tested, not sure if you want to take that risk though. If I were you I would wait until they work out the bugs, likely this will get integrated in 6.x which should be out not too far ahead. Can you live with 2.0 for now. I rather play safe than dealing with module crashes, it will be your call.

>>> Jerry Geis <geisj at MessageNetSystems.com> ( mailto:geisj at MessageNetSystems.com ) 1/10/2011 3:01 PM >>>
running 2.6.18-194.26 - not the latest but close.

jerry

Lisandro Grullon wrote: 

Sounds like a driver issue then....have you update your kernel recently?

>>> Jerry Geis <geisj at MessageNetSystems.com> ( mailto:geisj at MessageNetSystems.com ) 1/10/2011 2:56 PM >>>
I am not getting any events when I plug/unplug from the usb 3 port.
Works fine in a 2.0 port.

jerry


Lisandro Grullon wrote: 

Jerry,
See the /var/log/messages and see if you see the device being detect by the kernel when you plug in. tail /var/log/messages should hint you something..

>>> Jerry Geis <geisj at pagestation.com> ( mailto:geisj at pagestation.com ) 1/10/2011 2:36 PM >>>
>
> It is backwards compatible, but the chipset might not yet be
> supported.  What does lsdev show for the port?
>   
I dont have lsdev - I do have lspci. Is this what you meant?

00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge (rev 02)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition 
Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 
1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 
2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 
3 (rev 02)
00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI 
Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI 
Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI 
Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI 
Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI 
Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA IDE 
Controller (rev 02)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02)
01:00.0 USB Controller: NEC Corporation Unknown device 0194 (rev 03)
02:00.0 Network controller: RaLink RT2860
03:00.0 VGA compatible controller: nVidia Corporation GT218 [ION] (rev a2)
03:00.1 Audio device: nVidia Corporation High Definition Audio 
Controller (rev a1)
04:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
RTL-8110SC/8169SC Gigabit Ethernet (rev 10)

Jerry
_______________________________________________
CentOS mailing list
CentOS at centos.org
http://lists.centos.org/mailman/listinfo/centos

-- 

Jerry Geis 
MessageNet Systems 
101 East Carmel Dr. Suite 105 
Carmel, IN 46032 
(317)566-1677 
(317)663-0808 Fax 

-- 

Jerry Geis 
MessageNet Systems 
101 East Carmel Dr. Suite 105 
Carmel, IN 46032 
(317)566-1677 
(317)663-0808 Fax 

-- 

Jerry Geis 
MessageNet Systems 
101 East Carmel Dr. Suite 105 
Carmel, IN 46032 
(317)566-1677 
(317)663-0808 Fax 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.centos.org/pipermail/centos/attachments/20110110/09639668/attachment.html>