[CentOS] way to replace DELL PERC 6/E card???

Wed Jan 5 20:23:27 UTC 2011
Brian Mathis <brian.mathis at gmail.com>

OK, good point and I apologize for seeming rough, though the phrase
"flying blind" is not an really an insult.  Your post sounded a bit
like someone who hasn't dealt with servers much.  The typical answers
for something like this are "read the manuals", and "call support to
get a replacement if you have bad hardware".

As you have over 100 Dell servers there's a high likelihood that you
got a few bad ones, so I would just replace it and move on.  There's
really not much else to do.


On Wed, Jan 5, 2011 at 11:43 AM, mcclnx mcc <mcclnx at yahoo.com.tw> wrote:
> Thank you for your answer.  Before you say something please be careful.  I am NOT "blind".  We have more than 100 DELL servers on different classes and use different tools to monitor system (include OPMN).
>
> We have been doing lots of research on this issue and also discuss With DELL support at least three times but NOT get good answer.
>
> This PERC 6/E is NOT on "battery lean cycle" and we understand what will happen on "battary lean cycle".
>
>
>
> --- 11/1/5 (三),Brian Mathis <brian.mathis at gmail.com> 寫道:
>
>> 寄件者: Brian Mathis <brian.mathis at gmail.com>
>> 主旨: Re: [CentOS] way to replace DELL PERC 6/E card???
>> 收件者: "CentOS mailing list" <centos at centos.org>
>> 日期: 2011年1月5日,三,上午9:57
>> On Wed, Jan 5, 2011 at 9:47 AM,
>> mcclnx mcc <mcclnx at yahoo.com.tw>
>> wrote:
>> > we have several R900 servers with PERC 6/E card in it.
>> 袠ecently it we getting some message on /var/log/message
>> say change to "write back" and change back to "write
>> through".
>> >
>> > We figure out it is PERC 6/E card battery weak. 瓱y
>> questions are:
>> >
>> > 1. some battery only use one year (some even shorter)
>> and already this problem.
>> >
>> > 2. How come PERC 5/E does not have this issue?
>> >
>> > 3. where is DISK array information store for PERC 6/E?
>> 狢 did NOT see NVRAM on PERC 6/E card.
>> >
>> > 4. when replace PERC 6/E card and power on server
>> sometime it will ask you "import configuration" ans some
>> time it won't. hy?
>> >
>> > 5. When replace PERC 6/E card and power on. 䒷erver
>> ask "import configuration" should I answer "yes"?
>> >
>> > 6. where can I find documentation which mention
>> "import configuration"?
>> >
>> > Thanks.
>>
>>
>> Please install and learn about the Dell Open Manage
>> Monitoring tools,
>> and also read user guide for PERC/6 on Dell's web
>> site.  You seem to
>> be flying blind here and just guessing at what's going
>> on.  They have
>> a yum repository where you can "yum install" the software.
>>
>> Most likely the card performed a "battery relearn" cycle
>> where it
>> discharges and recharges the battery.  During this
>> process the battery
>> level drops and this causes the cache memory to become
>> disabled.
>>
>> It also sounds like you already got some new cards, which
>> may have
>> been a waste of money.  Install Dell OMSA, review the
>> OpenManage
>> status and logs, and probably send back the new cards you
>> already
>> bought (maybe your Dell sales rep will be upset that you
>> learned how
>> to do this instead of just buy new stuff from him).
>> _______________________________________________
>> CentOS mailing list
>> CentOS at centos.org
>> http://lists.centos.org/mailman/listinfo/centos
>>
>
>
>
> _______________________________________________
> CentOS mailing list
> CentOS at centos.org
> http://lists.centos.org/mailman/listinfo/centos
>