Date: Wed, 23 Mar 2011 13:18:09 -0400 From: Robert Heller <heller at deepsoft.com> Subject: Re: [CentOS] ACPI errors during bootup To: CentOS mailing list <centos at centos.org> Cc: centos at centos.org Message-ID: <201103231718.p2NHI9oI011643 at sharky.deepsoft.com> At Wed, 23 Mar 2011 19:34:10 +0530 CentOS mailing list <centos at centos.org> wrote: > > > > Hi, > > Am trying to build SMP kernel. | You do know that the *stock* CentOS 5.x kernels (2.6.18-...) are already | built as SMP kernels? That is, under RHEL 5/CentOS 5 you don't even get | uniprocessor kernels, unless you build them yourself (and there isn't | much need to bother). OK. But what could be the cause for throwing this ACPI errors? I have enabled ACPI in kernel config and the same is working fine with kernel-2.6.18-128 version. Thanks for the Help. > Took kernel-2.6.18-194.src.rpm, extracted, rpmbuilded with SMP option. > Successfully compile the new kernel and when using that kernel to boot up, > following errors were shown up(highlighted in bold & red color): > My kernel config file has ACPI and PCI configs enabled. > > Any pointers to what caused the problem are appreciated. > > > ****************************** > ********************************************************************************* > BIOS-e820: 0000000000010000 - 000000000009e000 (usable) > BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000001fee9000 (usable) > BIOS-e820: 000000001fee9000 - 0000000020000000 (reserved) > BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) > 0MB HIGHMEM available. > 510MB LOWMEM available. > Memory for crash kernel (0x0 to 0x0) notwithin permissible range > disabling kdump > Using x86 segment limits to approximate NX protection > DMI not present or invalid. > Using APIC driver default > ACPI: Unable to locate RSDP > Allocating PCI resources starting at 30000000 (gap: 20000000:dff00000) > Detected 1000.103 MHz processor. > Built 1 zonelists. Total pages: 130793 > Kernel command line: root=/dev/ram ramdisk_size=200000 > ramdisk_start=0x6000000 c > onsole=ttyS0,9600n8 plat=bryce reboot=warm n > Local APIC disabled by BIOS -- you can enable it with "lapic" > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Initializing CPU#0 > CPU 0 irqstacks, hard=c076f000 soft=c074f000 > PID hash table entries: 2048 (order: 11, 8192 bytes) > Console: colour dummy device 80x25 > Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) > Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) > Memory: 503320k/523172k available (2189k kernel code, 19224k reserved, 920k > data > , 232k init, 0k highmem) > Checking if this processor honours the WP bit even in supervisor mode... Ok. > Calibrating delay loop (skipped), value calculated using timer frequency.. > 2000. > 20 BogoMIPS (lpj=1000103) > Security Framework v1.0.0 initialized > SELinux: Initializing. > selinux_register_security: Registering secondary module capability > Capability LSM initialized as secondary > Mount-cache hash table entries: 512 > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 512K > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > Checking 'hlt' instruction... OK. > SMP alternatives: switching to UP code > Freeing SMP alternatives: 14k freed > CPU0: Intel(R) Celeron(R) M processor 1.00GHz stepping 08 > SMP motherboard not detected. > Local APIC not detected. Using dummy APIC emulation. > Brought up 1 CPUs > *checking if image is initramfs... it is > Freeing initrd memory: 10554k freed > NET: Registered protocol family 16 > PCI: PCI BIOS revision 2.10 entry at 0xff67f, last bus=4 > PCI: Using configuration type 1 > Setting up standard PCI resources > ACPI: Interpreter disabled. > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI: disabled > usbcore: registered new driver usbfs > usbcore: registered new driver hub > PCI: Probing PCI hardware > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO > PCI quirk: region 0500-053f claimed by ICH4 GPIO > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found* > PCI: Transparent bridge - 0000:00:1e.0 > NetLabel: Initializing > NetLabel: domain hash size = 128 > NetLabel: protocols = UNLABELED CIPSOv4 > NetLabel: unlabeled traffic allowed by default > PCI: Bridge: 0000:00:02.0 > IO window: c000-0000 > MEM window: c0100000-00000000 > PREFETCH window: disabled. > PCI: Bridge: 0000:00:03.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:00:1c.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:00:1e.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: No IRQ known for interrupt pin A of device 0000:00:02.0. Please try > using p > ci=biosirq. > PCI: No IRQ known for interrupt pin A of device 0000:00:03.0. Please try > using p > ci=biosirq. > NET: Registered protocol family 2 > IP route cache hash table entries: 4096 (order: 2, 16384 bytes) > TCP established hash table entries: 16384 (order: 5, 131072 bytes) > TCP bind hash table entries: 8192 (order: 4, 65536 bytes) > TCP: Hash tables configured (established 16384 bind 8192) > TCP reno registered > apm: BIOS not found. > audit: initializing netlink socket (disabled) > type=2000 audit(1300527457.278:1): initialized > Total HugeTLB memory allocated, 0 > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > Initializing Cryptographic API > alg: No test for crc32c (crc32c-generic) > ksign: Installing public key data > Loading keyring > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered (default) > pcieport-driver 0000:00:02.0: device [8086:3595] has invalid IRQ; check > vendor B > IOS > pcieport-driver 0000:00:03.0: device [8086:3596] has invalid IRQ; check > vendor B > IOS > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > ************************************************************************************************************************** -- Robert Heller -- 978-544-6933 / heller at deepsoft.com Deepwoods Software -- http://www.deepsoft.com/ () ascii ribbon campaign -- against html e-mail /\ www.asciiribbon.org -- against proprietary attachments -- -- Krishna Mohan B -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20110325/fea8523e/attachment-0005.html>