Wiadomość napisana przez m.roth at 5-cent.us w dniu 2011-05-10, o godz. 17:54: > Les Mikesell wrote: >> On 5/10/2011 10:17 AM, Maciej Jan Broniarz wrote: >>> >>> Wiadomo¶æ napisana przez Les Mikesell w dniu 2011-05-10, o godz. 17:07: >>> >>>> On 5/10/2011 9:53 AM, Maciej Jan Broniarz wrote: >>>>> Hi all, >>>>> >>>>> Centos 5.6 doesn't detect any disks connected to an Adaptec 6405 RAID >>>>> Controller. The hardware isn't brand new to the market, so what might >>>>> be the issue here? It seems, that the driver is missing for that >>>>> particular card. >>>>> >>>> I don't know about that particular device, but I've seen RAID >>>> controllers where you had to run their bios setup utility to add disks >>>> and create volumes even if you only want a single disk per volume. The >>>> OS only sees the volumes as logical drives. Or have you already done >>>> that step? >>> >>> I have and array setup in the controlers BIOS. What i need to do is to >>> install centos on the logical volume. Still, Centos 5.6 seems not to >>> have any drivers for Adaptec 6405. > <snip> > I'm not quite clear on your answer: are you saying that you created > logical RAID volumes, added the physical drives to it, and initialized > each volume? Yes. The problem is that Centos 5.6 has no valid driver for Adaptec 6405 All best, mjb