[CentOS] read failed after messages of non existing harddisks

Mon Oct 31 09:37:15 UTC 2011
Götz Reinicke <goetz.reinicke at filmakademie.de>


a cat /proc/partitions shows the two disks. They were direct connected
to an scsi port. (Old ide 2 scsi Raids).

I disconnected tham a long time ago and never worried about the errors,
as the system was up and running very smooth.

But now I connect other iscsi systems and the dmes and log is not that
easy to monitor with all the unneded messages ...

Anny idea, how to remove that partitions with the redhat tools?

	Regards . Götz

Am 28.10.11 18:10, schrieb Richard Mollel:
> Just reread your post again....
> Actually, "cat /proc/partitions", if the said partitions/disks are still being seen by kernel, you will need some sort of system scan to get rid of them, or a reboot.
> I have a SAN, and qlogic card as HBA, qlogic has a tool for scanning for non-existent partitions and remove them...
> http://filedownloads.qlogic.com/files/ms/56615/readme_dynamic_lun_22.html
> and with qlogic, I could have removed the non-existent LUNs via the option refresh:
> -r, --refresh
>                         To refresh, that is remove LUNs that are lost
>                         use the options "-r|--refresh". This will
>                         remove the LUNs which no more exist.
> How were these disks attached to your system?
> ----- Original Message -----
> From: Philippe Naudin <philippe.naudin at supagro.inra.fr>
> To: CentOS mailing list <centos at centos.org>
> Cc: 
> Sent: Friday, October 28, 2011 9:26 AM
> Subject: Re: [CentOS] read failed after messages of non existing harddisks
> Le ven 28 oct 2011 14:08:50 CEST, Götz Reinicke a écrit:
>> Hi,
>> some time ago I removed some physical disks from a server and now I'm
>> still getting dmesg messages like:
>> sd 0:2:2:0: SCSI error: return code = 0x00040001
>> end_request: I/O error, dev sdc, sector 0
>> And all lvm tools still grumbel about that disks too:
>> /dev/sdb: read failed after 0 of 4096 at 0: Eingabe-/Ausgabefehler
>>    /dev/sdb: read failed after 0 of 4096 at 1746969493504:
>> Eingabe-/Ausgabefehler
>> How may I tell the lvm and the system, that it is ok that this disk do
>> not exist any more?
> If a software RAID has been removed, don't forget :
>   mdadm --misc --zero-superblock /dev/sdX 
> where sdX is every disk that was part of the RAID.

Götz Reinicke

Tel. +49 7141 969 420
Fax  +49 7141 969 55 420
E-Mail goetz.reinicke at filmakademie.de

Filmakademie Baden-Württemberg GmbH
Akademiehof 10
71638 Ludwigsburg

Eintragung Amtsgericht Stuttgart HRB 205016

Vorsitzender des Aufsichtsrats:
Jürgen Walter MdL
Staatssekretär im Ministerium für Wissenschaft,
Forschung und Kunst Baden-Württemberg

Prof. Thomas Schadt